Austenitic stainless steel 304 is widely used in various applications due to its mechanical
strength, toughness, and, most importantly, its corrosion resistance. However, machining this …

In recent years, the need for eco-friendly machining processes has increased dramatically in
order to limit the excessive use of conventional cutting fluids, thereby reducing their negative …

Over the years, the use of traditional metalworking fluids has negatively impacted worker
health and the environment. Therefore, minimum quantity lubricant (MQL) has successfully …

During machining of stainless steels at low cutting-speeds, workpiece material tends to
adhere to the cutting tool at the tool–chip interface, forming built-up edge (BUE). BUE has a …

In this study, the AlTiCrN coatings with different Cr contents were deposited from AlTi and Cr
targets using a hybrid coating process that combines high power impulse magnetron …

AlTiN coatings with a NaCl structure have onset point of oxidation around 850° C. To
withstand oxidation above 850° C, we studied the influence of Cr addition on the structure …

A coating can be a deciding factor for machining performance of a tool by improving its tool
life and wear resistance. Additionally, a variety of elements, including coating thickness …

The potential of various varieties of hard outer surface coats of carbide inserts on surface
roughness, material removal rate (MRR) and flank wear, are scrutinized based on an …

Abstract Dry machining of Duplex Stainless Steel 2205 (DSS2205) is a challenging task due
to difficulties including high cutting temperatures, work hardening tendency and Built-up …

AlCrON coatings were deposited on plasma nitrided steel substrates by multi-arc ion plating
under different oxygen flow rates. The surface morphology, structure, composition …