Trigger injection and its influence on performances of a single-gap pseudospark switch were
studied by using a high-dielectric trigger unit and two types of pulse generators, where pulse …

The conduction loss of the pseudospark switch (PSS) can be reduced by connecting the
magnetic switch (MS) and PSS in series to form the magnetically delayed pseudospark …

Pseudospark discharge is a low‐pressure high‐voltage pulsed discharge with hollow
electrodes, and the overall discharge experiences several distinctive sub‐phases. The …

Used widely in microwave devices and material processing, triggered pseudospark
discharge can generate an electron beam, the adjustability of which is affected greatly by the …

In the present study comparative analysis for various geometrical parameters has been
presented for the operational characteristics in a single gap multiaperture pseudospark …

Pseudospark switch is a special kind of low-pressure (typically 1–100 Pa) high-voltage
pulsed discharge switch with the hollow electrode configuration. This paper experimentally …

This article describes the modified version of the commercially produced pseudospark
switch TPI1-10k/50 (pulsed current-10 kA and anode voltage-up to 50 kV) and the results of …

This paper presents data on investigation of the pseudospark switch whose trigger unit uses
a low-current auxiliary glow discharge with hollow cathode and hollow anode. The electrode …

摘要伪火花放电是一种工作于巴申曲线左半支, 引燃于空心阴极结构, 具有弥散的主放电通道的
特殊低气压放电, 在脉冲功率和等离子体等领域得到广泛应用. 该文综述了近年来有关伪火花 …

To reduce the commutation loss of the pseudospark switch, we connect a magnetic switch in
series to the anode of the pseudospark switch. Herein, the typical discharge process and …