High-performance integrated additive manufacturing with laser shock peening (LSP), is an
innovative selective laser melting (SLM) method to improve mechanical properties, and …

Deformation twinning and detwinning are widely observed in face‐centered cubic (FCC)
metallic materials processed by severe plastic deformation. Several twinning and …

Abstract CoCrFeNiAl x Mn (1− x)(x= 0, 0.2, 0.4, 0.6, 0.8, 1.0) high-entropy alloy (HEA)
coatings were prepared on the surface of AISI 1045 steel via laser cladding technology. The …

The influence of laser parameters and alloying elements on the dilution rate of FeCoCrNi
coating was investigated. It was found that the alloying elements have more significant effect …

As a natural macromolecule organic compound, chitosan (CTS,(C 6 H 11 NO 4) n) was used
as a green additive in low-tech node copper (Cu) chemical mechanical polishing (CMP) …

Fused silica is widely used as a substrate material in various optical precision devices, and
its surface quality plays a significant role in determining the optical performance. However, it …

Preferred surface integrity around the hole wall is one of the key parameters to ensure the
optimized performance of hole components for nickel-based superalloy. The novel hole cold …

The petroleum wastewater caused to serious problems in the aqueous and soil
environments, therefore treatment of petroleum wastewater has extremely been in the center …

In the present investigation, a new Ag–ZnO loaded carboxymethyl cellulose/K-carrageenan/
graphene oxide/konjac glucomannan (Ag–ZnO@ CGK) hydrogel was effectively prepared …

Nanofluid flooding has been proven to be very effective in enhanced oil recovery (EOR). The
performance depends on the material and formulation process. Previous studies have …