[PDF][PDF] Effect of Different Etching Time on Fabrication of an Optoelectronic Device Based on GaN/Psi.
Gallium nitride (GaN)/porous silicon (PSi) film was prepared using a pulsed laser deposition
method and 1064 nm Nd: YAG laser for optoelectronic applications and a series of Psi …
method and 1064 nm Nd: YAG laser for optoelectronic applications and a series of Psi …
Synthesis gallium nitride on porous silicon nano-structure for optoelectronics devices
The structure of gallium nitride (GaN) on porous silicon (psi) substrate was fabricated by
depositing high purity of 99.9% GaN on psi substrate using pulsed laser deposition method …
depositing high purity of 99.9% GaN on psi substrate using pulsed laser deposition method …
Experimental investigation of influence of electrolytic solution in porous silicon formation for solar energy conversion
The goal of this research is to give a low-cost approach for increasing the efficiency of solar
cells. The low cost, high resistive p-type silicon wafer is used here to fabricate the porous …
cells. The low cost, high resistive p-type silicon wafer is used here to fabricate the porous …
Performance Improvement of Photodetectors Based on ZIF-8 Nanostructures on Porous Silicon Substrate
Metal–organic frameworks (MOFs) have been widely used in optical devices due to their
specific optoelectronic properties and compatibility with various substrates. Zeolitic …
specific optoelectronic properties and compatibility with various substrates. Zeolitic …
Synthesis porous silicon substrates using electrochemical etching method assisted by laser
Nano-crystalline size of porous silicon substrates get attractive attention in fabrication of
optoelectronic devices as photodiode, photodetectors and solar cells. Electrochemical …
optoelectronic devices as photodiode, photodetectors and solar cells. Electrochemical …
[HTML][HTML] Silicon Surface Nanostructuration with Symmetric Cathode Configurations for Photonic Devices
The physical properties of porous silicon (PSi) can be adjusted to provide a better
performance in optoelectronic devices. A controlled method commonly used to fabricate PSi …
performance in optoelectronic devices. A controlled method commonly used to fabricate PSi …
Implications of the HF/H2O2 effect on the electrochemical etching formation of macroporous silicon at various etching times
AA Helaly, MA Farag, GM Youssef - Applied Physics A, 2025 - Springer
This study presents the development of macroporous silicon (MPS) structures via
electrochemical anodization of unpolished p-type silicon in hydrofluoric acid (HF)-based …
electrochemical anodization of unpolished p-type silicon in hydrofluoric acid (HF)-based …
Substrate selection and characterization in infrared detector design for sorting systems
NH Jumaah, MA Fakhri, H Al Bayaty - Journal of Optics, 2024 - Springer
In the production of optoelectronic devices such as photodiodes, photodetectors, and solar
cells, the nano-crystalline scale of porous silicon substrates attracts interest. Four samples of …
cells, the nano-crystalline scale of porous silicon substrates attracts interest. Four samples of …
Synthesized aluminum gallium nitride/porous-Si thin films at different compositions by pulsed laser deposition method
In this study, AlGaN/porous silicon substrate was prepared using three different Al content
(Al 2 O 3: GaN)(25, 50, and 75) percent for a gas sensing application. A photo …
(Al 2 O 3: GaN)(25, 50, and 75) percent for a gas sensing application. A photo …
Photovoltaic response of silicon wafers treated in the K2WO4-Na2WO4-WO3 melt
AV Kosov, OL Semerikova, SV Vakarin… - Journal of The …, 2021 - iopscience.iop.org
Texturing silicon wafers is one way to increase the performance of solar cells. This work is
the first to report on the surface modification of Si wafers by processing in polytungstate …
the first to report on the surface modification of Si wafers by processing in polytungstate …