Abstract Al–Zn–Mg–Cu alloys can be fabricated by a series of thermo-mechanical
processing methods (eg, hot rolling, forging and extrusion), which is able to serve in …

Nanotructural evolution and grain refinement leading to heterogeneous bimodal structure
were investigated during thermomechanical processing in carbon-containing FeMnCoCr …

In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …

The effects of small additions of calcium (0.1% and 0.5% 1) on the dynamic recrystallization
behavior and mechanical properties of as-extruded Mg-1Mn-0.5 Al alloys were investigated …

Aluminum alloys were used in various fields due to their high specific strength and low
density. However, the disadvantage of low strength limits its wider application. In this work …

Abstract The 2195 Al-Cu-Li alloy is widely utilized for the fabrication of key aerospace
vehicle components; hence, an in-depth understanding of its hot deformation behavior is …

For aluminum alloys in modern aerospace, it is more and more important for synchronous
improvement of strength and toughness by elaborated microstructural and compositional …

In the present work, for the first time, the effect of asymmetric rolling at room temperature on
the microstructural evolution, texture, hardness, tensile properties, and fracture surface of …

This study explores the hot deformation behavior of Al–Zn–Mg–Cu alloy through uniaxial hot
compression (200° C–450° C) using the Gleeble-1500. True stress–strain curves were …

The current research on 7-series aluminum alloys mainly focuses on solid solution and
aging treatments, as well as the flow stress during the deformation process. There are …