Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH
Passivation and film chemistry of 2507 super duplex stainless steel in modified artificial
seawater (ASW) are investigated. Removal of dissolved oxygen decreases the electric field …
seawater (ASW) are investigated. Removal of dissolved oxygen decreases the electric field …
Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates
Influence of temperature on the electrochemical and passivation behavior of 2507 super
duplex stainless steel in the simulated desulfurized flue gas condensates in thermal power …
duplex stainless steel in the simulated desulfurized flue gas condensates in thermal power …
Understanding the effect of fluoride on corrosion behavior of pure titanium in different acids
X Li, L Wang, L Fan, M Zhong, L Cheng, Z Cui - Corrosion Science, 2021 - Elsevier
Corrosion behavior of pure titanium in H 2 SO 4, HCl and HNO 3 with different
concentrations of F-was studied with electrochemical testing and morphology observation …
concentrations of F-was studied with electrochemical testing and morphology observation …
[HTML][HTML] Comparison of the corrosion and passivity behavior between CrMnFeCoNi and CrFeCoNi coatings prepared by argon arc cladding
C Wang, J Yu, Y Yu, Y Zhao, Y Zhang, X Han - Journal of Materials …, 2020 - Elsevier
The corrosion behavior and passive film properties of CrMnFeCoNi and CrFeCoNi coatings
in 0.5 mol/LH 2 SO 4 solution were investigated by potentiodynamic and potentiostatic …
in 0.5 mol/LH 2 SO 4 solution were investigated by potentiodynamic and potentiostatic …
Comparative study on the corrosion behaviour of 1.4529 super austenitic stainless steel and laser-cladding 1.4529 coating in simulated desulfurized flue gas …
J Li, Z Liu, H Ma, Q Liu, J Mao, J Zhang, Y Kong - Corrosion Science, 2022 - Elsevier
The super austenitic stainless steel 1.4529 coating (9 C) was prepared by laser cladding
technology. The microstructures and phase compositions of 9 C and commercial 1.4529 …
technology. The microstructures and phase compositions of 9 C and commercial 1.4529 …
Influence of pitting and iron oxide formation during corrosion of carbon steel in unbuffered NaCl solutions
L Cáceres, T Vargas, L Herrera - Corrosion science, 2009 - Elsevier
The corrosion evolution over time of a carbon steel rotating disk immersed in aerated NaCl
solutions was analyzed using a superposition model. Using this approach, partial …
solutions was analyzed using a superposition model. Using this approach, partial …
Effects of solution pH and Cl− on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments
YB Hu, CF Dong, M Sun, K Xiao, P Zhong, XG Li - Corrosion science, 2011 - Elsevier
In this work, the effects of solution pH and Cl− on the electrochemical behaviour of an
Aermet100 ultra-high strength steel in 0.5 M (Na2SO4+ H2SO4) solution were studied by …
Aermet100 ultra-high strength steel in 0.5 M (Na2SO4+ H2SO4) solution were studied by …
Hydrogen Content, Preoxidation, and Cooling Scenario Effects on Post-Quench Microstructure and Mechanical Properties of Zircaloy-4 and M5® Alloys in LOCA …
JC Brachet… - Journal of ASTM …, 2008 - asmedigitalcollection.asme.org
Previous papers pointed out the influence of long-term service exposures on the thermal-
mechanical behavior of Zr alloys in LOCA conditions and, especially, the impact of in-service …
mechanical behavior of Zr alloys in LOCA conditions and, especially, the impact of in-service …
Separation and kinetic study of iron corrosion in acidic solution via a modified tip generation/substrate collection mode by SECM
Anodic dissolution and cathodic hydrogen evolution behavior of pure Fe in 5 mM HClO 4
solution was investigated via a modified tip generation/substrate collection mode using …
solution was investigated via a modified tip generation/substrate collection mode using …
Corrosion behavior of aluminum in molten hydrated salt phase change materials for thermal energy storage
The corrosion behavior of aluminum 1060 in hydrated salt phase change materials (PCM)
melts comprised of Na 2 HPO 4· 12H 2 O-Na 2 SO 4· 10H 2 O was investigated through …
melts comprised of Na 2 HPO 4· 12H 2 O-Na 2 SO 4· 10H 2 O was investigated through …