Twin-related grain boundary engineering and its influence on mechanical properties of face-centered cubic metals: a review

X Li, X Guan, Z Jia, P Chen, C Fan, F Shi - Metals, 2023 - mdpi.com
On the basis of reiterating the concept of grain boundary engineering (GBE), the recent
progress in the theoretical models and mechanisms of twin-related GBE optimization and its …

Grain boundary evolution during low-strain grain boundary engineering achieved by strain-induced boundary migration in pure copper

X Yang, P Wang, M Huang - Materials Science and Engineering: A, 2022 - Elsevier
Grain boundary engineering (GBE) approaches involving small deformation and annealing
to modify grain boundary networks have been widely used to improve grain boundary …

Stability of Bipolar Plate Materials for Proton‐Exchange Membrane Water Electrolyzers: Dissolution of Titanium and Stainless Steel in DI Water and Highly Diluted …

L Fiedler, TC Ma, B Fritsch, JH Risse… - …, 2023 - Wiley Online Library
The widespread use of proton exchange membrane water electrolyzers (PEMWE) is
hindered by their high cost, of which a colossal factor is caused by the bipolar plates (BPP) …

[HTML][HTML] Effect of thermomechanical processing via rotary swaging on grain boundary character distribution and intergranular corrosion in 304 austenitic stainless steel

W Feng, Z Wang, Q Sun, Y He, Y Sun - Journal of Materials Research and …, 2022 - Elsevier
In the present work, the thermomechanical processing consisting of rotary swaging
deformation and annealing treatment was performed to optimize the grain boundary …

Enhancing mechanical property and corrosion resistance of Al0. 3CoCrFeNi1. 5 high entropy alloy via grain boundary engineering

L Hong, H Li, M Huang, Y Qin, S Xu, S Yang - Materials Characterization, 2024 - Elsevier
In the present study, to improve the performances of Al 0.3 CoCrFeNi 1.5 high entropy alloys
(HEAs), grain boundary character distribution (GBCD) of Al 0.3 CoCrFeNi 1.5 HEA has been …

On the critical strain of thermal-mechanical processing to tailor grain boundary character distribution in Incoloy 925 alloy

Y Zhu, Y Cao, Q He, R Luo, H Di, G Huang, Q Liu… - Intermetallics, 2022 - Elsevier
Through a series of thermal-mechanical processing (TMP) routes with various ratios of cold
rolling and subsequent high-temperature annealing, the samples with different critical strain …

Outstanding improvement in the CSL distribution in interstitial free (IF) steel via strain annealing route

D Rath, P Setia, N Tripathi, S Shekhar - Materials Characterization, 2022 - Elsevier
In the last two decades, grain boundary engineering (GBE) study has neglected the high
stacking fault energy BCC materials. Researchers have tried many single or multi-step strain …

Deformation characteristics and microstructure evolution during hot deformation of 18Cr–12Ni–4Si stainless steel

P Setia, S Mukherjee, SS Singh… - Journal of Materials …, 2023 - Springer
The effect of hot deformation parameters on the flow behavior of newly developed 18Cr–
12Ni–4Si has been studied. Hot compression tests were carried out in temperatures 1173 …

The Recrystallization Nucleation Mechanism for a Low-Level Strained 316L Stainless Steel and Its Implication to Twin-Induced Grain Boundary Engineering

Q He, S Xia, Q Bai, Y Zhang, L Li - Metallurgical and Materials …, 2024 - Springer
The thermal-mechanical processing (TMP) for twin-induced grain boundary engineering
(GBE) generally adopts a small amount of cold deformation and subsequent annealing at …

Delineating the role of dynamic and static recrystallization during hot working of nickel-based superalloy (IN600)

N Raja, A Kumar, S Shekhar, K Kulkarni - Materials Today Communications, 2024 - Elsevier
In the presented research, the dynamic working of nickel-based (IN600) superalloy was
performed and the micro-mechanisms affecting the deformation behaviour were closely …