Effect of carbon content on the structural, mechanical and corrosion properties of TiC films deposited using a HiPIMS discharge
TiC x thin films have been deposited on steel substrates using High Power Impulse
Magnetron Sputtering (HiPIMS) under Ar-C 2 H 2 atmosphere. The effect of varying the …
Magnetron Sputtering (HiPIMS) under Ar-C 2 H 2 atmosphere. The effect of varying the …
Decomposition performance and kinetics analysis of magnesium hydroxide regulated with C/N/Ti/Si additives for thermochemical heat storage
Abstract MgO/Mg (OH) 2 is a potential thermochemical material with high heat density and
stable characteristics. Four additives including Carbons, Carbides, Nitrides and Titanates …
stable characteristics. Four additives including Carbons, Carbides, Nitrides and Titanates …
Effect of N2 concentration on structural, morphological, and optoelectronic properties of Cu3N films fabricated by RF magnetron sputtering for photodetection …
Copper nitride (Cu 3 N) is a promising eco-friendly material for photodetection and
photovoltaic absorption. This study focuses on fabricating high-quality Cu 3 N thin films via …
photovoltaic absorption. This study focuses on fabricating high-quality Cu 3 N thin films via …
Synergistic effect of deposition temperature and substrate bias on structural, mechanical, stability and adhesion of TiN thin film prepared by reactive HiPIMS
Titanium nitride (TiN) thin films continue to attract unprecedented attention due to their
favourable mechanical, thermal, electrical and chemical properties. These properties …
favourable mechanical, thermal, electrical and chemical properties. These properties …
Effect of heat treatment on the thermal stability and properties evolution of TiAlPN thin film prepared by reactive HiPIMS
The influence of post-coating heat treatment on the thermal stability and evolving properties
of TiAlPN thin film is investigated. Three different annealing temperatures of 350° C, 550° C …
of TiAlPN thin film is investigated. Three different annealing temperatures of 350° C, 550° C …
Influence of Residual Stress on Mechanical and Tribology Behaviors of Calcium-Phosphate Coating on Commercially Pure Titanium via Integrated Electrospinning …
KS Hamedani, M Yadi, H Esfahani - Journal of Materials Engineering and …, 2024 - Springer
This study focuses on the role of residual stress in the tribological behavior of calcium-
phosphate (CaP) coating on titanium (Ti) substrate. The CaP coating was applied using an …
phosphate (CaP) coating on titanium (Ti) substrate. The CaP coating was applied using an …
[HTML][HTML] Influence of Plasma Arc Current and Gas Flow on the Structural and Tribological Properties of TiN Coatings Obtained by Plasma Spraying
A Kengesbekov - Coatings, 2024 - mdpi.com
This study investigates the development of TiN-based coatings using plasma spraying
technology, focusing on how plasma arc current and working gas flow rate affect the …
technology, focusing on how plasma arc current and working gas flow rate affect the …
Effect of Nitrogen Ratio on Structural, Electrical and Cell Adhesion Properties of TiZrN Thin Films Deposited at Room Temperature by Magnetron Sputtering
In this paper, we report the structural and electrical properties of TiZrN thin films deposited
by dc-magnetron sputtering under a working pressure of 0.67 Pa at room temperature. The …
by dc-magnetron sputtering under a working pressure of 0.67 Pa at room temperature. The …
NGHIÊN CỨU SỰ ẢNH HƯỞNG CỦA TỶ LỆ Ti: Zr LÊN CÁC ĐẶC TÍNH CẤU TRÚC, ĐẶC TÍNH ƯA NƯỚC VÀ TÍNH TƯƠNG THÍCH SINH HỌC CỦA MÀNG MỎNG …
PTM Phương, NĐ Tuyên, TB Đức, NTT Hiền… - TNU Journal of …, 2023 - jst.tnu.edu.vn
Tóm tắt Trong bài báo này, chúng tôi nghiên cứu sự ảnh hưởng của tỷ lệ Ti/Zr lên đặc tính
cấu trúc, đặc tính ưa nước và tính tương thích tế bào của màng mỏng TiZrN được chế tạo …
cấu trúc, đặc tính ưa nước và tính tương thích tế bào của màng mỏng TiZrN được chế tạo …