Magnesium alloys have received an increasing interest in the past 12 years for potential
applications in the automotive, aircraft, aerospace, and electronic industries. Many of these …

Automobiles are the inevitable mode of transportation. However, increasing fuel prices and
carbon dioxide emissions are posing a serious threat to automobile users and the …

Poor formability at room temperature (RT) has been the main bottleneck for a wider range of
applications of concentrated Mg–Al–Ca (–Zn) sheet alloys. Here, we report that RT stretch …

The effect of calcium on microstructure and corrosion characteristics of AZ31 was
investigated. Electron probe microanalysis, scanning electron microscopy and electron back …

The solidification of Mg–Al–Ca ternary alloys in the α-Mg solidification region was
investigated by microstructural and thermal analysis, and the liquidus projection was …

The effect of 0.5, 1.2, and 2.0 wt.% Ca additions on the microstructure, thermal stability, and
mechanical properties of the cast Mg–6Al–0.3 Mn alloy (AM60) was investigated. Addition of …

Improvements in energy efficiency, reduction of greenhouse gas emissions and 3R (reduce,
reuse and recycle) have been one of the central topics in recent years in environment and …

The microstructure, tensile property and creep behavior of three Mg–Al–Sr (AJ) and two Mg–
Al–Sr–Ca (AJC) based alloys have been investigated. The as-cast microstructure of Mg–4Al …

Abstract The Mg–Ca alloys with 2 wt%, 3 wt%, 5 wt% Al content were fabricated in this
paper. After be extruded at 673 K with the ratio of 16: 1, the microstructures and mechanical …

Microstructure and corrosion behaviour of a Mg-9Al alloy with minor alloying additions (Mn,
Y, Nd, Ca and Sn) are evaluated. All of the additions form Al-rich intermetallics with varying …