The hydrogen trapping ability of 15 Fe-CX alloys is compared in this work. Five types of
carbides, ie Ti, Cr, Mo, W and V based carbides, and their effect on the hydrogen …

Herein, the effects of cold deformation before heat treatment on the hydrogen diffusion and
hydrogen embrittlement sensitivity of low-alloy high-strength steel for marine risers were …

The effect of hydrogen on the fracture toughness properties of an API X65 pipeline steel is
studied under simulated H 2 S in-service conditions. The fracture toughness properties are …

Medium-Mn steel is the newly developed steel acting as a promising candidate of the 3rd-
generation advanced high strength steels. In the present study, the effect of hydrogen on the …

In situ electrochemical nanoindentation has been used to study the effect of hydrogen on the
nanomechanical response of Alloy 718. Observations show that hardness increase as a …

This work evaluates the permeation curve characteristics for four quenched and tempered
generic, ternary alloys, each containing one specific carbide. The different carbides (W2C …

It is often unavoidable that automotive steel sheet parts might undergo plastic deformation
during forming and service life. The present research explored the effect of pre-strain up to …

Dislocation plasticity in the vicinity of grain boundaries (GBs) plays a critical role in H-
induced intergranular failure. Their interaction mechanisms under H environment, however …

The hydrogen trapping efficiency of different types of W based precipitates is considered in
three generic Fesingle bondCsingle bondW alloys with increasing carbon content and a …

Cyclic quenching and tempering (QT) heat–treatment processes have the potential to
improve the mechanical properties of steel due to the formation of fine grain size …