The researchers have worked on many facets of machining of hardened steel using different
tool materials and came up with their own recommendations. Researchers have tried to …

Hard turning is gaining grounds for machining hardened steels as it has several benefits
over grinding. There are several issues, which should be understood and dealt with, to …

Manufacturing activity is a major consumer of energy and natural resources. In machining
process, a large amount of heat is produced whose removal requires the use of suitable …

This study focuses on optimizing turning parameters based on the Taguchi method to
minimize surface roughness (Ra and Rz). Experiments have been conducted using the L9 …

A two-step method is presented for the automatic prediction of tool life in turning operations.
First, experimental data are collected for three cutting edges under the same constant …

In recent years, hard turning has been found to be a well-known substitute for traditional
grinding for acquiring the finish quality of hardened steel without sacrificing productivity …

The purpose of this experimental work is to study the impact of the machining parameters
(Vc, ap, and f) on the surface roughness criteria (Ra, Rz, and Rt) as well as on the cutting …

This paper presents the mathematical modelling and parametric optimization on flank wear
and surface roughness based on response surface methodology and grey-based Taguchi …

The present study aims at investigating the influence of the different machining parameters
represented by the cutting speed (V c), the depth of cut (ap), and the feed rate (f) on the …

Many studies investigating the cutting performances of waterjets for several kinds of
materials such as steel, brass, glass, or aluminium are available. However, there are few …