Progress in additive manufacturing on new materials: A review
N Li, S Huang, G Zhang, R Qin, W Liu, H Xiong… - Journal of Materials …, 2019 - Elsevier
Recent efforts and advances in additive manufacturing (AM) on different types of new
materials are presented and reviewed. Special attention is paid to the material design of …
materials are presented and reviewed. Special attention is paid to the material design of …
Research status of laser cladding on titanium and its alloys: A review
F Weng, C Chen, H Yu - Materials & Design, 2014 - Elsevier
Titanium and its alloys are restricted in the field of application. Laser cladding, as a kind of
surface modification technique, is employed to fabricate coatings with improved wear …
surface modification technique, is employed to fabricate coatings with improved wear …
Surface nanocrystallization induced by fast multiple rotation rolling on Ti-6Al-4V and its effect on microstructure and properties
Y Li, K Sun, P Liu, Y Liu, P Chui - Vacuum, 2014 - Elsevier
A nanostructured layer was fabricated by using fast multiple rotation rolling (FMRR) on the
surface of Ti-6Al-4V alloy, with grain size 10–19 nm in the top surface layer by means of …
surface of Ti-6Al-4V alloy, with grain size 10–19 nm in the top surface layer by means of …
Laser deposition-additive manufacturing of ceramics/nanocrystalline intermetallics reinforced microlaminates
J Li, M Su, X Wang, Q Liu, K Liu - Optics & Laser Technology, 2019 - Elsevier
Laser rapid prototyping (LRP) of the Stellite12-B 4 CY 2 O 3 mixed powders produced a
bottom layer; then the Stellite12-B 4 C-Cu-Y 2 O 3 mixed powders were deposited on this …
bottom layer; then the Stellite12-B 4 C-Cu-Y 2 O 3 mixed powders were deposited on this …
Laser cladding Fe-Al-Cr coating with enhanced mechanical properties
X Luo, Z Yao, P Zhang, D Gu, Y Chen - Journal of Wuhan University of …, 2019 - Springer
Abstract Dense Fe-Al-Cr coatings with approximately 50 μm in thickness are successfully
prepared on the 1045 carbon steel substrates via a laser cladding process. Proper Cr …
prepared on the 1045 carbon steel substrates via a laser cladding process. Proper Cr …
In-situ synthesized Ni–Zr intermetallic/ceramic reinforced composite coatings on zirconium substrate by high power diode laser
Ni–Zr intermetallic/ceramic reinforced composite coatings were in-situ synthesized by laser
cladding series of Ni–Cr–B–Si powders on zirconium substrate. Microstructure, phase …
cladding series of Ni–Cr–B–Si powders on zirconium substrate. Microstructure, phase …
[HTML][HTML] Cu 对TA15-2 钛合金表面Stellite 12 基激光合金化涂层组织结构及耐磨性的影响
李嘉宁， 巩水利， 王娟， 单飞虎， 李怀学， 吴冰 - 金属学报, 2014 - jmst.org
摘要在TA15-2 表面进行激光同轴送粉合金化Stellite 12-B 4 C 粉末制备耐磨复合涂层.
研究表明, 加入Cu 可促使大量超细纳米多晶体及非晶相在涂层中产生, 从而增强涂层的耐磨性 …
研究表明, 加入Cu 可促使大量超细纳米多晶体及非晶相在涂层中产生, 从而增强涂层的耐磨性 …
TA15 钛合金激光非晶-纳米晶增强镍基涂层的组织结构及耐磨性
李嘉宁， 巩水利， 李怀学， 单飞虎 - 焊接学报, 2014 - hjxb.hwi.com.cn
在重要航空材料TA15 钛合金基材表面进行激光同轴送粉熔覆Ni60A-Ni 包WC-TiB 2-Y 2 O 3
混合粉末可生成非晶-纳米晶增强复合涂层. 对涂层进行微观组织观察, 显微硬度测试及室温干 …
混合粉末可生成非晶-纳米晶增强复合涂层. 对涂层进行微观组织观察, 显微硬度测试及室温干 …
Fabrication of nanoparticulate reinforced metal matrix composites by laser cladding
M Zhong, D Jiang, H Zhang, C Hong… - Journal of laser …, 2014 - pubs.aip.org
The nanoparticulate reinforced metal matrix composites (nPRMMCs) can further improve the
ductility and fracture toughness of conventional microscale PRMMCs. The uniform …
ductility and fracture toughness of conventional microscale PRMMCs. The uniform …
Laser-clad YSZ@ Ni (core–shell nanoparticle) composites coatings
L Xiong, H Zheng, P Yu, G Li, Z Chen, B Zhang - Ceramics International, 2015 - Elsevier
YSZ@ Ni core–shell nanoparticles were used to prepare a composite coating on an Fe-
based alloy by laser cladding. Samples were sintered layer-by-layer with a laser power P in …
based alloy by laser cladding. Samples were sintered layer-by-layer with a laser power P in …