The full-field moisture-induced strains (in-plane) and Z-displacements (out-of-plane) of the
different tissues of tamarack and red oak woods were assessed by three-dimensional digital …

Biomass densification is a key technology for economic and environmental use of biomass
in bio economy. Thus, the aim of the study was to analyze and simulate the influence of …

The paper presents a comprehensive experimental–numerical study on dimensional
stability of spruce CLT panels and provides new insights into understanding the effect of …

Moisture content is the environmental factor that has the greatest influence on the physical
and mechanical properties of wood materials. This research aimed to quantify the effect of …

Classical guitar necks were submitted to 40, 65 and 80% relative humidity (RH) during time
periods ranging from 24 h to several months, and moisture-induced deformations were …

Bu çalışmada Türkiye'de yetişen önemli ağaç türlerimizden olan ve mobilya sanayisinde
yaygın kullanılan sapsız meşe (Quercus petrea) odununun bazı ortotropik mekanik …

Inspired by phenomena in the plant world, a meteoro-sensitive rotational actuator is
developed. The design uses a hygro-active shell, whose water-based swelling is restricted …

Wood is un-isotropic material and its mechanical properties will vary with the grain
orientation. This study investigated elastic constants of Calabrian pine (Pinus brutia Ten.) …

Shear moduli of Calabria pine (Pinus Brutia Ten.) predicted using non-destructive test
method in this study. Calabria pine logs harvested from Beşkonak, Burdur and sawn in to …

Bu çalışmada kayın ve karaçam kullanılarak üretilmiş kavelalı birleştirmelerin eğilme
performansları deneysel ve nümerik olarak incelenmiştir. Birleştirmeler 10 mm çapında 48 …