The interactions between dislocations (dislocations and deformation twins) and boundaries
(grain boundaries, twin boundaries and phase interfaces) during deformation at ambient …

Owing to their exceptional properties, high-entropy alloys (HEAs) and high-entropy materials
have emerged as promising research areas and shown diverse applications. Here, the …

Additive manufacturing produces net-shaped components layer by layer for engineering
applications,,,,,–. The additive manufacture of metal alloys by laser powder bed fusion (L …

Metallic wires with high strength-ductility at both room and cryogenic temperatures are
always pursued for engineering applications. However, traditional metallic wires are tortured …

A low-alloy and high-carbon martensite steel (0.66% C) with ultrafine grains is produced by
combination of Tempforming (tempering and deforming of a quenched steel) and reheating …

Abstract An ultrafine grained Al-0.3 wt% Cu has been produced by cold rolling to a thickness
reduction of 98%(ε vM= 4.5). The deformed structure is a typical lamellar structure with a …

High strength-ductility is the prerequisite requirement for the widely used steel wires in
engineering applications. Traditional strengthening strategies on these wires are suffocated …

Here, a single-track CoCrFeMnNi high entropy alloy (HEA) was successfully fabricated by
laser melting deposition (LMD). Combining the experimental observations and numerical …

It is a challenge in practice to cost-effectively fabricate copper matrix composites having high
mechanical properties and outstanding electrical conductivity for electric power applications …

Nickel-based single-crystal superalloys are widely used in the manufacture of aeroengine
turbine vanes for their excellent high-temperature performance. Low-angle grain boundaries …