For decades, high susceptibility to intergranular corrosion and stress corrosion cracking is
the Achilles's heel for the 5xxx series Al alloys with high Mg (> 3 wt%) owing to precipitation …

One of the corrosion mitigation methods that is used for the protection of steel operating in
seawater environments involves the application of sacrificial metallic coatings (such as …

The heterogeneous structure of Al alloys renders them susceptible to localized corrosion
due to the different electrochemical properties existing in the Al-rich solid solution matrix and …

Mg grain boundary (GB) segregation and GB diffusion can impact the processing and
properties of Al-Mg alloys. Yet, Mg GB diffusion in Al has not been measured experimentally …

The microstructure and intergranular corrosion have been studied in an extruded and aged
Al-Mg-Si alloy doped with 0.05 wt% Cu after immersing the material in an acidified salt …

The objective of this study was to identify the effect of base metal (BM) locations on the
corrosion behavior of friction stir welded dissimilar 2024-T351 to 7075-T651 aluminum …

The microstructure, texture, tensile strength, and corrosion behavior of Al–Mg–Sc–Zr alloy at
different annealing temperatures were investigated using SEM, TEM, XRD, and dual …

A transition zone formed using electron beam wide-feed additive deposition of AA5356 on a
AA7075 substrate was investigated for microstructure, composition, tensile strength …

The high-temperature oxidation resistance of laser additive manufactured (LAM) Ti6Al4V
before and after laser shock processing (LSP) was investigated. The samples were oxidized …

The intergranular corrosion of Al-Mg alloys arises from sensitisation due to thermal
exposure. Here, a protected low angle (8.7°) grain boundary which hinders the intergranular …