Ice-templated porous tungsten and tungsten carbide inspired by natural wood
Y Zhang, G Tan, D Jiao, J Zhang, S Wang, F Liu… - Journal of Materials …, 2020 - Elsevier
The structures of tungsten and tungsten carbide scaffolds play a key role in determining the
properties of their infiltrated composites for multifunctional applications. However, it is …
properties of their infiltrated composites for multifunctional applications. However, it is …
Structural evolution of directionally freeze-cast iron foams during oxidation/reduction cycles
Cyclical oxidation/reduction behavior of iron-based powders and porous pellets is of great
interest for iron-air batteries, steam-iron, and chemical looping processes, but extended …
interest for iron-air batteries, steam-iron, and chemical looping processes, but extended …
Mechanical and biocorrosive properties of magnesium-aluminum alloy scaffold for biomedical applications
This study investigates the morphology, microstructure, compressive behavior, biocorrosion
properties, and cytocompatibility of magnesium (Mg)-aluminum (Al) alloy (AE42) scaffolds …
properties, and cytocompatibility of magnesium (Mg)-aluminum (Al) alloy (AE42) scaffolds …
Surface functionalization of three dimensional-printed polycaprolactone-bioactive glass scaffolds by grafting GelMA under UV irradiation
In this study, bioactive glass nanoparticles (BGNPs) with an average diameter of less than
10 nm were synthesized using a sol-gel method and then characterized by transmission …
10 nm were synthesized using a sol-gel method and then characterized by transmission …
Control of pore structure during freeze casting of porous SiC ceramics by different freezing modes
N Wang, Y Liu, Y Zhang, Y Du, J Zhang - Ceramics International, 2019 - Elsevier
The frozen moulds, including homogeneous, unidirectional and bidirectional freezing, were
designed using materials with different thermal conductivities, and the temperature …
designed using materials with different thermal conductivities, and the temperature …
Freeze-casted tungsten skeleton reinforced copper matrix composites
R Li, W Chen, K Zhou, Y Sun, Y Wen, Z Wang… - Journal of Alloys and …, 2023 - Elsevier
Abstract Copper-tungsten (Cu-W) composites with a copper content larger than 50 vol% are
expected to have a good combination of electrical conductivity and mechanical properties …
expected to have a good combination of electrical conductivity and mechanical properties …
Integrated porous cobalt oxide/cobalt anode with micro-and nano-pores for lithium ion battery
An integrated porous cobalt-oxide/cobalt (Co 3 O 4/CoO/Co) anode was prepared by facile
processes, including directional freeze casting of a Co foam and its partial thermal oxidation …
processes, including directional freeze casting of a Co foam and its partial thermal oxidation …
Effects of pore morphology on the cyclical oxidation/reduction of iron foams created via camphene-based freeze casting
Solid-oxide iron-air batteries have potential for applications in large-scale energy storage
systems, but their storage materials, iron and iron oxides, have limited cycle life due to …
systems, but their storage materials, iron and iron oxides, have limited cycle life due to …
Fabrication of strong yet malleable bulk porous high entropy laves intermetallics via chemical immersion dealloying of eutectic high entropy alloys
In this Letter, we fabricate porous high entropy intermetallic (HEI) with a Laves phase
through chemical immersion dealloying of thermally annealed eutectic high entropy alloys in …
through chemical immersion dealloying of thermally annealed eutectic high entropy alloys in …
Evolution of directionally freeze-cast Fe2O3 and Fe2O3+ NiO green bodies during reduction and sintering to create lamellar Fe and Fe-20Ni foams
Directional freeze-casting (FC) of powder suspensions followed by freeze-drying and
sintering is a versatile and scalable processing route for creating metallic foams with highly …
sintering is a versatile and scalable processing route for creating metallic foams with highly …