Recent advances on bonding mechanism in cold spray process: A review of single-particle impact methods
MA Adaan-Nyiak, AA Tiamiyu - Journal of Materials Research, 2023 - Springer
Cold spray (CS) processing is a layer-by-layer solid-state deposition process in which
particles at a temperature below their melting point are launched to sufficiently high …
particles at a temperature below their melting point are launched to sufficiently high …
Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite
Dense intragranular distribution of nanoscale reinforcements is highly desirable since it is
effective in reconciling the strength-ductility trade-off in Al matrix composites (AMCs). Herein …
effective in reconciling the strength-ductility trade-off in Al matrix composites (AMCs). Herein …
Thermally and mechanically tuned interfaces of magnesium alloys for bioimplant applications
The advent of magnesium (Mg) alloys has ushered in a paradigm shift in the field of
biomedical implants, owing to their inherent biodegradability, commendable mechanical …
biomedical implants, owing to their inherent biodegradability, commendable mechanical …
Ductile and high strength Cu fabricated by solid-state cold spray additive manufacturing
In this work, pure Cu with excellent strength and ductility (UTS of 271 MPa, elongation to
fracture of 43.5%, uniform elongation of 30%) was prepared using cold spray additive …
fracture of 43.5%, uniform elongation of 30%) was prepared using cold spray additive …
Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: crystal plasticity modeling and texture effect
Shear localization is an important failure mode, or even the dominant mode in metals at high-
strain rates. However, it is a great challenge to accurately predict the occurrence and …
strain rates. However, it is a great challenge to accurately predict the occurrence and …
High-strain-rate deformation: Stress-induced phase transformation and nanostructures in a titanium alloy
XR Guan, Q Chen, SJ Qu, GJ Cao, H Wang… - International Journal of …, 2023 - Elsevier
Microstructural evolution in adiabatic shear bands of a Ti-10V-2Fe-3Al (wt.%) alloy
subjected to high strain-rate dynamic loading was investigated in detail via high-resolution …
subjected to high strain-rate dynamic loading was investigated in detail via high-resolution …
High ductility induced by twin-assisted grain rotation and merging in solid-state cold spray additive manufactured Cu
In contrast to fusion-based additive manufacturing (AM) methods, cold spray (CS) is a solid-
state metal powder deposition process that has evolved from a traditional coating method to …
state metal powder deposition process that has evolved from a traditional coating method to …
Subsurface damage in laser-assisted machining titanium alloys
Y He, G Xiao, Z Liu, Y Ni, S Liu - International Journal of Mechanical …, 2023 - Elsevier
Laser-assisted machining is an effective to improve the machinability of hard-to-machine
material which has been already applied to titanium alloys. To reveal the subsurface …
material which has been already applied to titanium alloys. To reveal the subsurface …
Significant reduction in friction and wear of an ultrafine-grained single-phase FeCoNi alloy through the formation of nanolaminated structure
Reducing friction and wear has long posed a challenge for metallic components under dry
sliding conditions. This study unveils a significant reduction in friction and wear of a single …
sliding conditions. This study unveils a significant reduction in friction and wear of a single …
[HTML][HTML] Mechanical response and microstructure evolution of SiC particle-reinforced Al-MMCs under ultrasonic loading
High volume fraction (≥ 45 vol%) SiC particle-reinforced Al matrix composites are difficult
for forming and manufacture. A simple and efficient method is proposed in this research to …
for forming and manufacture. A simple and efficient method is proposed in this research to …