Ignition and burnout characteristics of semi-coke and bituminous coal blends were
investigated by thermogravimetric analyzer and drop tube furnace. The results showed that …

Low NOx burner and air staged combustion are widely applied to control NOx emission in
coal-fired power plants. The gas-solid two-phase flow, pulverized coal combustion and NOx …

Experimental studies were conducted by thermogravimetric analyzer and drop tube furnace
to clarify the co-combustion and NO formation characteristics of semi-coke and bituminous …

The influence of coal-particle size on nitrogen oxide (NO x) emission and burnout
characteristics was experimentally investigated in a pulverized coal-fired furnace. This study …

Investigations on the retrofitted low-volatile coal-fired 330 MW boiler were performed. Gas
temperatures and concentrations, furnace temperatures, boiler efficiencies were measured …

Deep-staging combustion is an effective technology for reduction of NO x, but is often
accompanied by the combustion worsening. Oxygen enriched and deep-staging combustion …

A numerical evaluation was performed to investigate the effects of swirl arrangement (co-
swirling and counter-swirling flows) and coal injection mode (non-, fully-, and partially …

Deep air-staged combustion is one of the important technologies to further reduce NO x
emissions, and the mechanism of oxygen influence on NO heterogeneous reaction under …

Many suburb and rural households in the world are still using small coal-fired stoves for
cooking and heating, which traditionally has been associated with low-efficiency combustion …

Hybrid technologies combining fuel blending and air-staging processes have been applied
to a pulverized coal fired furnace to reduce NO x emissions. In this study, an Australian …