The power system is experiencing an ever-increasing integration of photovoltaic power
plants (PVPPs), which leads to the demand on the power system operators to force new …

Fault current studies are often required to determine the proper settings for the overcurrent
relays. The conventional synchronous generators are known to exhibit high current …

Photovoltaic power plants (PVPPs) typically operate by tracking the maximum power point
(MPP) in order to maximize the conversion efficiency. However, with the continuous increase …

One of the major concerns associated with the increasing penetration of grid-connected
photovoltaic (PV) power plants is the operational challenges (eg, overloading and …

The fault characteristics of an inverter interfaced distributed generator (IIDG) depend on its
control strategy and whether it has a low voltage ride-through (LVRT) capability, which …

Multilevel cascade H-bridge (CHB) converters are one of the promising solutions for medium-
and large-scale grid-connected photovoltaic power plants. However, there is a lack of a …

The share of renewable energy sources interfaced to the bulk power system through power
electronic devices is continuously increasing. As a result, the power systems of the future …

This paper proposes a novel flexible power point tracking (FPPT) method under partial
shading conditions (PSC) to control the power delivered to the grid and make it less than the …

Flexible power point tracking (FPPT) is the control of active power generated by grid-
connected photovoltaic power plants (GCPVPPs) to provide grid-support functionality. An …

This paper proposes an analytical expression for the calculation of active and reactive
power references of a grid‐tied inverter, which limits the peak current of the inverter during …