Metal matrix composites (MMCs) have been developed in response to the enormous
demand for special industrial materials and structures for automotive and aerospace …

In this work, alumina ceramic was bonded to itself with composite foils (Ti/Cu/Ni/Cu/Ti). The
thermodynamics analysis indicates that Ti-Cu liquid firstly formed and reacted with alumina …

In this paper, the “flash brazing” of SiC is successfully achieved using Ag-Cu-Ti alloy in air
for seconds at an ultra-low furnace temperature of 400° C. The interface temperature …

Ductile transient liquid phase (TLP) bonding joints reinforced by multiple precipitates were
produced using novel pre-sintered coatings and Au-Si fillers; therefore, the highest strength …

In order to obtain low cost, high-performance titanium matrix composite materials, first
principle calculations and selective laser melting (SLM) experiments were conducted. Firstly …

Joining between C/C composites and single crystal Ni-based superalloy is of great
significance to promote their wide application in aerospace. A sound joint of them is …

In present study, we employed a simple and cost-effective chemical precipitation method to
synthesize CeO 2: ZnO nanocomposites with various Ce: Zn molar ratios. The X-ray …

The wetting behavior of the Sn-Zr/ZrO 2 system was investigated by different drop methods,
and the influencing of temperature and Zr content on the wetting interfacial microstructure …

Carbon fiber reinforced carbon matrix (C/C) composites are one of the most promising
thermal lightweight materials. However, the inferior wettability of inactive metals on C/C …

The wettability of the metal/SiC system is not always excellent, resulting in the limitation of
the widespread use of SiC ceramic. In this paper, three implantation doses of Si ions (5× …