Spot welding, particularly resistance spot welding (RSW), is a critical joining process in
automotive industry. The development of advanced high strength steels for applications in …

The use of resistance spot welding (RSW) in the automotive industry is by far the most
preferred and widely used joining technique for sheet metal parts and is likely to continue for …

The effects of single and double pulse resistance spot welding on the microstructures of an
advanced high strength automotive steel are presented in this work. The double pulse …

Contact resistance is a complicated phenomenon and resistance welding significantly
escalates its complexity. Interference of various parameters in resistance spot welding …

Similar and dissimilar combinations of a 1000 MPa galvanised dual phase (DP) steel and a
980 MPa transformation induced plasticity (TRIP) steel were resistance spot welded under …

Transformation-induced plasticity (TRIP) steel resistance spot welds are delicate to low-
energy interfacial failure via crack propagation through martensitic fusion zone during cross …

Due to the brittle martensite structure in the fusion zone (FZ), the resistance spot welded
specimens of high-strength low alloy (HSLA) steels are likely to have low fracture toughness …

Opposition spot welding is a welding technique utilizing the standard of non-fusible terminal
obstruction welding, where the temperature increases to obtain the dissolving point of the …

The aim of the study was to improve the stability of the quality of joints of two Ti-2% Al-1%
Mn alloy plates with a thickness of 0.5 mm, obtained by resistance spot welding. The …

This paper presents a review of various interlayers employed to enhance the properties of
similar and dissimilar materials welded by resistance spot welding (RSW). The commonly …