Multicomponent high‐entropy alloys (HEAs) can be tuned to a simple phase with some
unique alloy characteristics. HEAs with body‐centered‐cubic (BCC) or hexagonal‐close …

The microstructural evolution during aging and its influence on corrosion behavior and
mechanism of the Fe-19Mn-9Al-0.8 C-5Ni low-density steel (LDS) were studied. The results …

The influence of martensite morphology and volume fraction on low-temperature impact
toughness of dual-phase (DP) steels was investigated by impact tests, nanoindentation …

The stress corrosion cracking (SCC) behavior and mechanism of Fe-Mn-Al-C-Ni high
specific strength steel (HSSS) in the marine atmospheric environment have been studied …

In this review, effects of initial microstructure before intercritical annealing and processing
routes of dual phase (DP) high strength steels are discussed. Prior-applied deformation …

The establishment of composition-microstructure-property relationship is a long-standing
topic in materials science, yet neither continuum mechanics approaches nor machine …

In this study, microtensile and nanoindentation tests were systematically performed to
evaluate the contribution of the block boundary to yield strength and to correlate the strength …

Recently, new categories of dual-phase (DP) steels with ultimate tensile strength (UTS) up to
1400 MPa have been developed by increasing martensite fraction and refining …

Accurate and efficient characterization and modelling of deformation responses are critically
essential in the development of advanced metal forming processes. This work presents a …

In this work, the effects of strain rates (10− 4 s− 1~ 10− 1 s− 1) on ferrite hardening of dual-
phase steel were investigated through pre-straining tests. The strain localization was …