Over the years, diffusion aluminide bond coats have been widely used for providing
oxidation resistance to Ni-base superalloy components of advanced gas turbine engines …

Whether an airplane or a space shuttle, a flying machine requires advanced materials to
provide a strong, lightweight body and a powerful engine that functions at high temperature …

NiCrAlY coatings were prepared on cast Ni-based IN100 superalloy using arc ion plating,
leading to a dense structure. The surface became smoother after vacuum heat treatment …

The isothermal-and cyclic-oxidation behavior ofthermal barrier coating (TBC) systems
consisting ofvacuum plasma-sprayed (VPS) Ni-22Cr-10Al-1Y (wt.%) bondcoatings and air …

ABSTRACT MAX phase materials possess an optimum combination of both high-
temperature oxidation and corrosion resistance, and superior mechanical and tribological …

Oxygen self-diffusion coefficients were determined in polycrystals of α-alumina either
'undoped'or doped with 500wt. ppm (225molppm) Y2O3 in the temperature range 1460 …

Morphology changes in the oxide layer during the oxidation process of nickel alloys at 1100°
C was described under simplifying assumptions as a sequence of local phase equilibria …

In many cases, alumina scales are assumed to grow predominantly by oxygen diffusion, but
some authors have found that the growth can be controlled by aluminium diffusion. These …

Insights into high temperature oxidation of Al2O3-forming Ti3AlC2 are made to understand
the sub-parabolic oxidation rate and the absence of Al-depletion zone beneath the …

The microstructural evolution and high temperature oxidation resistance performance of
NiCoCrAlYTa coating were investigated via isothermal oxidation at 1100℃ and 1150℃ for …