This paper reviews current knowledge about the rheology and applications of highly
concentrated molten polymers, focusing on hard particles with sizes ranging from several …

Powder injection molding (PIM) is a well-known technique to manufacture net-shaped,
complicated, macro or micro parts employing a wide range of materials and alloys …

As the aperture of the optical component increases, the integrated design of the silicon
carbide optical component and the support structure will lead to a more complex structure of …

Processability of ceramics via injection molding consists in reaching sufficiently high solid
loading despite submicrometric size of Al 2 O 3 ceramic particles with a correspondingly …

The application of highly filled composites is limited by their poor processing and rheological
properties due to the high loading of fillers. One possible solution to this problem is to use …

In this paper, we study the effect of the addition of wood flour as a filler in a recycled
polyethylene (r-PE) in view of its potential applications in 3D printing. The composites …

Cellulose/PLA-based blends (up to 77 vol./vol.% of the added fibers) for applications in
extrusion-based technology were realized in an internal mixer by setting different operating …

Abstract High Temperature Heat Exchangers (HTHXs) are used in many industrial
processes and are likely to become key components in green power generation. For the …

Low-pressure powder injection molding (LPIM) is a cost-effective technology for producing
intricate small metal parts at high, medium, and low production volumes in applications …

The rheological behavior of 316L stainless steel micro-nano powder feedstock was
investigated by torque rheometer test which measured variations of mixing torque as a …