This review presents a thorough survey of the roll bonding process with a focus on the
bimetallic bars/tubes as well as the bonding models and criteria. The review aims to provide …

抄録< jats: p> This 1997 book describes advances in the field of superplasticity. This is the
ability of certain materials to undergo very large tensile strains, a phenomenon that has …

Fusion welding causes joint deterioration when joining aluminum alloys, which limits the use
of aluminum alloy components in high-end equipment. This paper focuses on an overview of …

Ti/Al dissimilar metals were successfully joined by means of the vacuum diffusion bonding
after aluminizing on the surface of Ti sheet. Microstructure in the interface zone of Ti/Al …

The vacuum hot pressing bonding test of 2A12 aluminum alloy were performed under
different temperatures (with 17.5% deformation). The microstructure evolution was …

The oxide layer on the surface has always been a key obstacle to achieving the diffusion
bonding of Al alloys. It is a challenge for performing diffusion bonding without removing …

As an advanced solid state bonding process, plastic deformation bonding (PDB) is a highly
reliable metallurgical joining method that produces significant plastic deformation at the …

A high strength joint obtained at relatively low temperature and pressure by diffusion
bonding has always been a challenge for manufacturing of aluminum alloy heat sinks. In this …

Understanding the interaction between void and grain boundary (GB) is important to the
design of radiation resistant materials by GB engineering and to achieve high quality …

Diffusion bonding behavior of fine-grained magnesium alloy with the average grain size of
8.5 μm, that was processed by hot rolling, was examined. The material behaved in a …