During the last years, the scientific and industrial community has focused on the astonishing
properties of Fe–Mn–Al–C steels. These high advanced steels allow high-density reductions …

The current work aims at obtaining optimum amount of austenite after processing of a
medium manganese steel in order to invoke partial twinning induced plasticity (TWIP) …

Abstract Effects of reduced (–40° C), ambient (20° C), and elevated (200° C) deformation
temperatures on the microstructure evolution and strain hardening behavior of two low-C …

The cold cracking process in MAG welding, microstructure and mechanical properties of
ultra-high strength steel Weldox 1300 were investigated. It has been shown that the …

Chemical composition of four medium-Mn steels containing a various Mn content (3 and 5%)
have been proposed in the present work. The two steels are base steels whereas the other …

The textures of cold-rolled AISI 304 austenitic steel were the object of the investigations. The
austenite steel was deformed by cold-rolling to 20, 40 and 70% reduction. A significant …

The interaction between recovery, recrystallization, and strain-induced precipitation in two
high-Mn steels, one of them microalloyed with Nb (0.1 pct) was investigated using …

The electrochemical corrosion properties of 26Mn-3Si-3Al and 27Mn-4Si-2Al austenitic
steels in two different states were studied in 0.1 MH 2 SO 4 and 3.5% NaCl using …

The present study aims to characterize the weldability of a multiphase, automotive steel
containing Al and Si additions from the point of view of its tendency to form non-metallic …

Purpose: The aim of the paper is to assess the tendency of alloying elements to macro-and
microsegregation during hot-forging and successive thermomechanical rolling of medium …