To enhance the strength of traditional 5xxx series alloys, this work designed Al-Mg-Zn alloys
with high Mg content and different Zn/Mg ratios (wt%, Zn/Mg ratio< 1.0) drawing inspiration …

Through-thickness corrosion homogeneity of stabilized AA5083 alloy thick plate was
investigated. For the as-received stabilized plates, no differences in corrosion behavior are …

Friction surfacing (FS) is a solid-state coating technology for metallic materials, where the
deposition of a consumable material on a substrate is enabled via friction and plastic …

A recently developed healable Al-Mg 2 Si designed by the programmed damage and repair
(PDR) strategy is studied considering the role microstructural defects play on precipitation …

This study systematically examines the impact of reversion heat treatments (220–280℃ for 1
h) on the microstructure evolution, electrochemical corrosion, intergranular cracking (IGC) …

The mechanical properties, corrosion behavior, and related microstructures of Al–Mg-Mn
AA5083 rolled sheets microalloyed with Sc and Zr were investigated under various …

In this work, the effect of initial grain structure on the microstructure evolution and
superplastic behavior of Al-7Mg-0.3 Sc-0.2 Zr (wt%) alloy were studied. The results show …

The impact of medium-and high-entropy alloy fillers (4E MEA-Al0. 25Fe0. 25Ni0. 25Cu0. 25,
and 5E HEA-Al0. 20Fe0. 20Ni0. 20Cu0. 20Ti0. 20) on the microstructures and corrosion …

Microalloying is an effective method to improve the properties of Al–Mg alloys. The
microstructure, mechanical properties and corrosion behaviours of Al–9.2 Mg–0.8 Mn–x Cu …

In this study, as a vital part of the production of Mn-increased 5083 Al alloy, ie,
homogenization annealing before hot rolling, the target states of key Al6Mn precipitation …