Magnesium and its alloys have gained significant popularity due to their light weight and
their potential for use as bioresorbable materials. However, their application is limited in …

This article presents a concise overview of modern achievements and existing knowledge
gaps in the area of biodegradable magnesium alloys. Hundreds of Mg-based alloys have …

It was demonstrated in this work that the corrosion rate of Mg alloy ZK60 can be reduced
through the use of an integrated process of extrusion and equal channel angular pressing …

In this study, scanning Kelvin probe, in situ scanning vibrating electrode technique and
micro-electrochemical electrolyte cell are employed to investigate the corrosion of …

The corrosion rate of Mg indicates a strong crystallographic dependence in chloride-
containing, alkaline environments that correlates inversely with oxide film thickness. In …

Mg alloys are promising candidates for biodegradable materials. To control their dissolution
rate, the orientation-dependent corrosion behaviour of pure-Mg single crystals was …

The influence of crystal orientation on the corrosion behaviour of twin roll cast (TRC) AZ31
Mg alloy sheet has been investigated using correlative microscopy and immersion testing in …

Lithium metal anodes have the potential to be a disruptive technology for next-generation
batteries with high energy densities, but their electrochemical performance is limited by a …

Freestanding thin films of Mg–Li (magnesium–lithium) alloys with a Li mass fraction between
1.6%(m/m) and 9.5%(m/m) were prepared and studied with respect to their structure and …

By investigating the corrosion behavior of two oriented surfaces for an as-extruded Mg–3%
Al–1% Zn alloy bar, we demonstrate that the surface with a high concentration of {1 0− 1 0} …