Advances in micro-and nanofabrication technologies have enabled the development of
novel micro-and nanomechanical resonators which have attracted significant attention due …

This study reports the fabrication method and sensing performance for novel 1D zinc oxide
(ZnO) nanorods and nanotubes grown on nickel MEMS cantilevers. The fabrication of the …

Residual stress gradients in electroplated nickel films of 1 μm thickness are characterized for
a wide range of current densities (1–20 mA/cm 2) and electroplating temperatures (30–60° …

Accessing fluids thermophysical properties is crucial in chemical engineering for they are
required in most of process parameter calculations. Nevertheless, these are not always …

We report quantitative composition data on continuous jet-mixing of ethanol with ambient
carbon-dioxide (CO 2) at temperatures (T=[313 K–333 K]) and pressures (p=[9 MPa to 11 …

We report on the simultaneous measurement of density and viscosity of nitrogen in gas and
supercritical phases at 308.15 K and pressures up to 24 MPa. The density and viscosity …

The measurement of the composition of ethanol-CO 2 mixtures at high pressures is
important in many applications involving supercritical fluids such as drying of alcogels or …

In order to improve the measuring accuracy of micro-electromechanical system (MEMS)
resonant sensor with micro-cantilever structure to measure fluid density, a temperature …

An all fiber-optical method to monitor densities and viscosities of liquids utilizing a steel
cantilever (4 x 0.3 x 0.08 cm3) is presented. The actuation is performed by photothermally …

The frequency response of ferromagnetic nickel microcantilevers immersed in binary
mixtures of carbon dioxide (CO 2) and nitrogen (N 2) at 308 K and pressures up to 23 MPa …