The use of polyurethanes and, therefore, the quantity of its scrap are increasing.
Considering the thermoset characteristic of most polyurethanes, the most circular recycling …

This article raised the issue of studies on the use of new bio-polyol based on white mustard
seed oil and 2, 2'-thiodiethanol (3-thiapentane-1, 5-diol) for the synthesis of rigid …

Rosin is mainly composed of abietic acid, which enhances the properties of materials that
have a high cost and which involve a complicated process. This study produces high …

This paper presents research into the preparation of rigid polyurethane foams with bio-
polyols from rapeseed and tall oil. Rigid polyurethane foams were designed with a …

The viscoelastic property is a crucial parameter for evaluating the feasibility of the foam to be
used as pressure relief. This work aims to perform experimental measurements to determine …

Porous ceramics with high porosity and extensive interconnected pores have great
application potential in fields ranging from dye removal to high-temperature particulate …

Rigid polyurethane foams were manufactured using rapeseed oil-based polyol with hydroxyl
number 270 mg KOH/g (10 wt%-50 wt%) and ground egg shell waste as a natural filler (20 …

Sawdust, microcellulose and nanocellulose and their silanized forms were used to reinforce
rigid polyurethane (PU) foam composites. The concentration of fillers was varied in the …

The reported study concerns the introduction of renewable raw materials into the formulation
of rigid polyurethane foams in the quest for the sustainable development of polymer …

Polyurethane foam (PUF), a representative insulation material, not only prevents heat
conduction but can also support a load. Particular interest in rigid PUF proliferated over the …