As two important industrial manufacturing materials, ceramics and metals have their own
advantages and disadvantages in terms of physical, chemical, and mechanical properties …

Abstract Silicon nitride (Si 3 N 4) ceramic and Invar alloy have been brazed by using AgCuTi
active filler and the Ni foam was added to further improve mechanical properties of joints in …

Joint seam is always the weak region of the welded joint. The soldered/brazed ceramic joint
always fails through the joint seam due to lower strength of the solder/braze. In this work, to …

An induction brazing method for joining Al 2 O 3 ceramic to 316L stainless steel (SS) was
developed in this study. The Sn–Ti alloy was rapidly melted by induction heating, which …

Realizing the joining of SiC ceramic to Al0. 3CoCrFeNi high‐entropy alloy is a technical
interest for aviation, aerospace, and nuclear energy industry. In this study, the reliable …

Abstract Porous Si 3 N 4 (P–Si 3 N 4) ceramic was successfully joined to Invar alloy using a
Cu–Ti active brazing alloy for the first time. The interfacial reactions between the Cu–Ti filler …

Brazing is a commonly used method to join porous Si 3 N 4 ceramics; it requires high
temperature, long holding time, and vacuum environment. In this work, given the …

The reactive wetting of AgCuTi filler metal over a TC4 substrate was conducted using real-
time in situ hot stage microscopy. In addition to the commonly observed bulk liquid, a rapidly …

Si 3 N 4 ceramics have shown promising application prospects as the sealing materials for
liquid metal batteries (LMBs). However, the joining of Si 3 N 4 to the metal shell of LMBs is …

The reliable brazing of the ZTA ceramic joints was successfully obtained using Ni-Ti filler
metal. The microstructure and mechanical properties of the joints brazed at different …