The following article introduces, in a thorough manner, how the chemical pozzolanic
reaction takes place in cement composites containing the fly ash (FA) additive. In the …

This study focused on the effect of using wastepaper sludge ash (WPSA) as a partial
substitute for cement in the production of lightweight foamed concrete (LFC). The LFC was …

This study aims to investigate the feasibility of preparing a one-part geopolymer using fly ash
(FA) and ground granulated blast furnace slag (GGBS) as the main raw materials and solid …

Although geopolymer cement (GPC) is a substitute for Portland cement, its application is
restricted due to the need for high-temperature curing (40–90° C), which makes it …

With the advanced development in sustainable cementitious materials, cleaner one-part
alkali-activated materials (AAM) have shown a significant effect on increasing compressive …

The solidification/stabilization technique recommended for the disposal of municipal solid
waste incineration (MSWI) fly ashes in developed countries was inappropriate for the …

The aim of this study is to develop an innovative high-strength restoration mortar using
recycled materials as an alternative to the mortars used in historical buildings. Compressive …

One of the drawbacks of the Ordinary Portland cement industry is its vast carbon dioxide
emission quantities causing environmental and health problems. These problems can be …

This study investigates the impact of hemp fibers on two fiber-reinforced compositions, clay-
based and lime-pozzolan mortar. Three compositions were prepared for each mortar …

This research investigated the high-temperature resistance of alkali-activated mortar (AAM)
using Class F fly ash (FA) blended with calcium carbide residue (CR) as a binder. The FA …