This research work articulated a comparative study on Incoloy 825 Ni-based alloy and SAF
2507 super duplex stainless steel dissimilar joints. Welding was accomplished by ER2594 …

Weldability is one of the key requirements for automotive materials. This two-part paper aims
at understanding the metallurgical phenomena during resistance spot welding of stainless …

ABSTRACT A hybrid powder of Ti6Al4V, which consists of 50 wt% plasma atomised (PA)
spherical and 50 wt% hydride-dehydride (HDH) irregular-shaped powder with a flowability …

Implementation of new materials in automotive body-in-white requires through knowledge of
their metallurgical response to welding process thermal cycle. This two-part paper aims at …

The mechanical properties of dissimilar weld joints between SAF 2205 and AISI 316L were
investigated. Welding was accomplished by different types of welding wires: AWS ER 347 …

The paper aims at investigating the microstructure, failure mode transition, peak load and
energy absorption of DP600 dual phase steel during the tensile-shear test. It was found that …

The paper addresses the microstructural evolution and failure mode analysis for dissimilar
resistance spot welding of austenitic and duplex stainless steels. Microstructural …

The paper addresses the microstructure and failure characteristics of dissimilar resistance
spot welds between austenitic stainless steel and ferritic stainless steel. The fusion zone …

This work shows a new, non-invasive methodology using infrared (IR) images to evaluate
the behavior of the dissimilar DP600/AISI304 joints conducted by resistance spot welding …

Welding defects are generally considered to be undesirable in resistance spot welding
process because they suggest deterioration of weld quality. A systematic investigation was …