Fusion-based additive manufacturing (AM) has significantly grown to fabricate Nickel-based
superalloys with design freedom across multiple length scales. Several phenomena such as …

Abstract Austenitic Stainless Steel grade 304L and 316L are very important alloys used in
various high temperature applications, which make it important to study their mechanical …

The multiaxial low cycle fatigue behavior of nickel-based alloy 690 at 350° C was
investigated. The multi-slip planar dislocation configuration under non-proportional loading …

The experimental stress–strain data from isothermal tensile tests over a wide range of
temperatures (623–923K at an interval of 50K), strains (0.02–0.30 at an interval of 0.02) and …

Isothermal fatigue (IF) tests at 250° C, 350° C and 450° C, and thermomechanical fatigue
(TMF) tests of 316LN stainless steel within the temperature range of 250–450° C under in …

Abstract Effects of strain amplitude ranging from 0.2% to 1.0% on the low-cycle fatigue
properties of Inconel 617 alloy at 700° C were studied. Much attention was paid to reveal the …

Flow stress during hot deformation depends mainly on the strain, strain rate and
temperature, and shows a complex nonlinear relationship with them. A number of semi …

The effect of strain rate and nitrogen content on cyclic deformation and substructural
changes in 316LN stainless steel is investigated at temperatures 773, 823 and 873 K …

The evolution of dislocation densities and of dislocation microstructures during cyclic
loading of AISI 316L is systematically evaluated. In addition, internal stresses are also …

Creep–fatigue interaction (CFI) behavior of 316LN stainless steel with varying nitrogen
content (0.07, 0.14 and 0.22 wt.%) is investigated at temperature of 873 K under strain …