Probing grain size effect in the superelastic Ti-20Zr-3Mo-3Sn alloy using spherical nanoindentation

Y Zhou, A Fillon, D Laillé, T Gloriant - Materials Characterization, 2022 - Elsevier
Grain size effect on superelasticity was investigated in Ti-20Zr-3Mo-3Sn alloys for the same
crystallographic texture and for a broad grain size range from 7 μm to 180 μm. The …

Martensitic transformation and superelastic properties of Ti-Nb base alloys

HY Kim, S Miyazaki - Materials Transactions, 2015 - jstage.jst.go.jp
Ti-Ni shape memory alloys have been used in a variety of industries because of their unique
property of shape memory effect, which is an ability to remember their original shape and …

[HTML][HTML] Investigation of the microstructure, mechanical properties and fracture mechanisms of dissimilar friction stir welded aluminium/titanium joints

TA Shehabeldeen, Y Yin, X Ji, X Shen, Z Zhang… - Journal of Materials …, 2021 - Elsevier
Dissimilar friction stir lap welded joints of AA6061-T6 and Ti6Al4V were successfully welded
using suitable parameters, and the effect of tool rotational speed was studied to investigate …

A thermo-mechanical treatment to improve the superelastic performances of biomedical Ti–26Nb and Ti–20Nb–6Zr (at.%) alloys

F Sun, YL Hao, S Nowak, T Gloriant, P Laheurte… - Journal of the …, 2011 - Elsevier
A flash-thermal treatment technique has been developed very recently to improve both the
critical stress to induce the martensitic transformation (MT) and the recoverable deformation …

Deformation mechanism and mechanical properties of a thermomechanically processed β Ti–28Nb–35.4 Zr alloy

S Ozan, J Lin, Y Li, Y Zhang, K Munir, H Jiang… - Journal of the mechanical …, 2018 - Elsevier
The effects of thermomechanical treatment on the microstructure and mechanical properties
of a newly developed β titanium alloy, ie, Ti–28 Nb–35.4 Zr (wt%, hereafter denoted Ti–Nb …

The roles of oxygen content on microstructural transformation, mechanical properties and corrosion resistance of Ti-Nb-based biomedical alloys with different β …

J Wang, W Xiao, L Ren, Y Fu, C Ma - Materials Characterization, 2021 - Elsevier
The effects of oxygen content on phase transformation, mechanical properties and corrosion
resistance of Ti single bondNb based alloys with different Nb contents (15, 32 and 38 wt%) …

Mechanical properties, structural and texture evolution of biocompatible Ti–45Nb alloy processed by severe plastic deformation

A Panigrahi, B Sulkowski, T Waitz, K Ozaltin… - Journal of the …, 2016 - Elsevier
Abstract Biocompatible β Ti–45Nb (wt%) alloys were subjected to different methods of
severe plastic deformation (SPD) in order to increase the mechanical strength without …

[HTML][HTML] On the role of internal stresses on the superelastic behaviour of Ti-24Nb (at.%)

EM Hildyard, LD Connor, NL Church, TE Whitfield… - Acta Materialia, 2022 - Elsevier
Ti-Nb-based alloys undergo a martensitic transformation that gives rise to superelastic and
shape memory behaviours over a wide range of temperatures. The design of such alloys for …

Cyclic deformation behavior of a Ti–26 at.% Nb alloy

M Tahara, HY Kim, H Hosoda, S Miyazaki - Acta Materialia, 2009 - Elsevier
The effect of cyclic deformation on superelasticity was investigated in a Ti–26 at.% Nb alloy.
Loading and unloading tensile tests with a constant maximum applied strain of 2.5% were …

Influence of a short thermal treatment on the superelastic properties of a titanium-based alloy

F Sun, S Nowak, T Gloriant, P Laheurte, A Eberhardt… - Scripta Materialia, 2010 - Elsevier
The effect of a very short aging treatment (360s at 873K) on the superelastic properties has
been investigated on the ternary Ti–20Nb–6Zr (at.%) titanium-based alloy. Such short …