Machining of AISI 304 austenitic stainless steel is considered to be difficult due to its
structural aspects and low thermal conductivity, which leads to increased temperatures …

AISI 310S austenitic stainless steels are widely used in many industries, such as oil, gas,
and petrochemical industries containing hot concentrated acids, due to their superior …

In this research paper, an effort was made to investigate the dry sliding wear rate of friction
stir welded AA6262/AA5456 composite performed by the Taguchi approach. Wear …

The purpose of the current study is to investigate the wear behavior of epoxy-based
composites. These composite materials are frequently used in load-bearing applications …

Chrome steel is a quality high-carbon alloy steel that offers a high degree of hardness with
compressive strength, abrasion resistance, good ductility relatively good impact properties at …

Aluminum alloy is a widely utilized material in the modern automotive industry due to its
lightweight properties and corrosion resistance. Unconventional machining processes …

The machining nickel–iron base alloy is still a challenging process for the past few decades
due to their indigenous properties. The nickel–iron alloys are hard and high strength …

The purpose of this study was to identify the suitable Friction Stir Welding (FSW) parameters
that would be used for welding scrapped Al alloy plates. On the experimental side, the study …

In this work, hybrid nanocomposites were successfully fabricated using a stir casting
machine setup with a weight of 3%, 5%, and 7%. Additionally, 7% hybrid nanocomposite …

This study focuses on the preparation of Al-based hybrid composites using AA7475 as the
main alloy reinforced with two materials, ZrO2 and SiC. The combination of stir-squeeze …