Carbon fiber reinforcements with an excellent mechanical performance to weight ratio are
primarily preferred for advanced composite applications. The poor interfacial adhesion …

The superb mechanical and physical properties of individual carbon nanotubes (CNTs)
have provided the impetus for researchers in developing high‐performance continuous …

The introduction of carbon nanotubes (CNTs) into fiber-reinforced polymer composites has
been achieved predominantly via two routes: mixing CNTs entirely throughout the matrix …

This paper describes a method to improve the thermal conductivity, mechanical properties
and thermal dimensional stability of polyimide-based composites by rationally introducing …

To enhance the interfacial properties of carbon fiber/epoxy composites, a layer of carbon
nanotubes (CNTs) about 25–30 nm thickness was deposited on carbon fiber surface at low …

The introduction of carbon nanotubes (CNTs) into conventional fibre-reinforced polymer
composites creates a hierarchical reinforcement structure and can significantly improve …

This paper focuses on improving the out-of-plane properties of carbon fiber/epoxy
composites to extend their applications. Carbon nanotubes (CNTs) were introduced on …

An aqueous suspension deposition method was used to coat the sized carbon fibers
T700SC and T300B with commercially carboxylic acid-functionalized and hydroxyl …

In recent years, carbon nanotubes (CNTs) grown on fibers have attracted a lot of interest as
an additional reinforcing component in conventional fiber-reinforced composites to improve …

Multi-walled carbon nanotubes (MWCNTs) were grafted onto carbon fibers (CFs) using an
injection chemical vapor deposition method. The orientation and length (16.6–108.6 μm) of …