Influence of stress on the corrosion behavior of Ti alloys: a review
X Yang, B Lin, H Zhang, J Tang, T Zhou, Y Wang… - Journal of Alloys and …, 2024 - Elsevier
Titanium alloys are widely used in many domains due to their excellent high specific
strength and corrosion resistance. Stress plays a very important role in the application of …
strength and corrosion resistance. Stress plays a very important role in the application of …
Hot corrosion behavior of network structured TiBw/TA15 composite with Na2SO4 film at 800° C
Q Kang, X Xu, G Wang, S Luo, L Zhan - Materials Characterization, 2023 - Elsevier
Experimental and theoretical methods were combined to investigate the hot corrosion
performance of TiB w/TA15 composite coated with a Na 2 SO 4 film at 800° C. The final …
performance of TiB w/TA15 composite coated with a Na 2 SO 4 film at 800° C. The final …
Microstructure and mechanical properties of particle reinforced high-temperature titanium composites
In this research, a novel high-temperature titanium alloy, Ti750, was used as matrix and
SiCp, SiCw, B 4 C, and GNPs as reinforcements to prepare both ex situ and in situ …
SiCp, SiCw, B 4 C, and GNPs as reinforcements to prepare both ex situ and in situ …
Effect of SiC Content on Hot Corrosion Resistance of TiC and Ti5Si3 Reinforced Ti-Al-Sn-Zr Titanium Matrix Composites
H Wang, X Xu, Y Liu, C Cai, Z Sun, M Han… - Journal of Materials …, 2021 - Springer
Abstract TiC and Ti 5 Si 3 reinforced titanium matrix composites (TMCs) were successfully
prepared by an in situ reaction of SiC particles with Ti-Al-Sn-Zr alloy through powder …
prepared by an in situ reaction of SiC particles with Ti-Al-Sn-Zr alloy through powder …
Hot Corrosion and Oxidation Behavior of Network Structured TiBw/TA15 Composite at 1073 K
Q Kang, X Xu, G Wang, Z Li, S Luo - Journal of Materials Engineering and …, 2024 - Springer
The hot corrosion and high temperature oxidation performance of the TiBw/TA15 composite
were tested at 1073 K for up to 100 h. The final mass gain caused by the high temperature …
were tested at 1073 K for up to 100 h. The final mass gain caused by the high temperature …
Effects of heat treatment and carbon nanotubes content on microstructure and mechanical properties of CNTs/Ti–Mo–Nb–Al–Si composites
J Li, R Peng, K Zhou, J Huang, J Ru, Y Zhou, X Xu - Applied Physics A, 2021 - Springer
In this paper, carbon nanotubes (CNTs) reinforced Ti–12.8 Mo–2.1 Nb–2.7 Al–0.2 Si (TB8)
matrix composites were synthesized by low-energy ball milling and cold pressing sintering …
matrix composites were synthesized by low-energy ball milling and cold pressing sintering …