Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel
This study considers the comparison between the surface roughness criteria (Ra, Rz and Rt)
of the wiper inserts with conventional inserts during hard turning of AISI 4140 hardened steel …
of the wiper inserts with conventional inserts during hard turning of AISI 4140 hardened steel …
Hard machining of hardened bearing steel using cubic boron nitride tool
MA Yallese, K Chaoui, N Zeghib, L Boulanouar… - Journal of materials …, 2009 - Elsevier
In many cases, hard machining remains an economic alternative for bearing parts
fabrication using hardened steels. The aim of this experimental investigation is to establish …
fabrication using hardened steels. The aim of this experimental investigation is to establish …
Performance of coated and uncoated mixed ceramic tools in hard turning process
The present contribution deals with the study of the effects of cutting speed, feed rate and
depth of cut on the performance of machining which traditionally named “machinability”. The …
depth of cut on the performance of machining which traditionally named “machinability”. The …
Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN …
A comparative study is undertaken in terms of the surface roughness criterion (Ra), the
tangential cutting force (Fz), the cutting power (Pc), and the material removal rate (MRR) in …
tangential cutting force (Fz), the cutting power (Pc), and the material removal rate (MRR) in …
Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno …
AK Sahoo, B Sahoo - Measurement, 2013 - Elsevier
This paper presents the mathematical modelling and parametric optimization on flank wear
and surface roughness based on response surface methodology and grey-based Taguchi …
and surface roughness based on response surface methodology and grey-based Taguchi …
Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method
The development in the manufacturing flied requires the continuous optimization using
various methods. In order to minimize some technological output (such as surface …
various methods. In order to minimize some technological output (such as surface …
Modeling and optimization in dry face milling of X2CrNi18-9 austenitic stainless steel using RMS and desirability approach
Stainless steel is characterized by a poor machinability due to its high ductility, and low
thermal conductivity. The objective of this work is to model the output responses namely; …
thermal conductivity. The objective of this work is to model the output responses namely; …
Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology
In this study, an attempt has been made to statistically model the relationship between
cutting parameters (speed, feed rate and depth of cut), cutting force components (Fx, Fy and …
cutting parameters (speed, feed rate and depth of cut), cutting force components (Fx, Fy and …
Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic
B Fnides, MA Yallese - Mechanics, 2008 - mechanika.ktu.lt
The aim of this work is to evaluate cutting forces and surface roughness in hard turning of
hot work steel X38CrMoV5-1 [AISI H11]. This steel is hardened to 50 HRC, machined by a …
hot work steel X38CrMoV5-1 [AISI H11]. This steel is hardened to 50 HRC, machined by a …
Comparative assessment of machining environments (dry, wet and MQL) in hard turning of AISI 4140 steel with CC6050 tools
Large quantities of coolant–lubricants are still widely used in the metal working industry,
generating high consumption and discard costs and impacting the environment. This paper …
generating high consumption and discard costs and impacting the environment. This paper …