In the last two decades, metal matrix nanocomposites have witnessed tremendous growth.
Particulate-reinforced nanocomposites have been extensively employed in the automotive …

Bi-continuous alumina/aluminium composites were made by infiltrating an alumina preform
which had the structure of a reticulated ceramic foam. The low density preforms were …

A new process has been developed to produce sintered α-Al2O3 reinforced with sub-micron
Ni particles. The process is based on the infiltration of ceramic preforms with liquid salts …

The mass of high-speed trains can be reduced using the brake disk prepared with SiC
network ceramic frame reinforced 6061 aluminum alloy composite (SiCn/Al). The thermal …

This research focuses on fracture mechanisms in metal–ceramic composites. Two co-
continuous composites, Cu/Al2O3 and Al/Al2O3 and a metal–matrix composite Al/SiC were …

This is a review paper on the existing approaches to modelling of discrete cracks (fracture)
and diffuse microcracking (damage) in ceramic matrix composites under mechanical or …

The thermal residual stresses in two types of co-continuous composites copper/aluminum
oxide (Cu/Al2O3) and aluminum/aluminum oxide (Al/Al2O3) were measured by neutron …

A porous mullite ceramic, which was obtained via replica method using coal fly ash as the
main starting material, was used as reinforcement preform to fabricate an A356/fly-ash …

The lifetime of the electronic packaging system is shortened due to the mismatch in the
coefficient of thermal expansion (CTE) between the substrate and the packaging material …

It is one inevitable problem that optimizing properties of Si 3 N 4 ceramics by introducing
second phase would produce thermal mismatch stress, which may lead to interfacial …