In this study, laser powder bed fusion (LPBF) was used for the fabrication of an interstitial-
strengthened high entropy alloy (iHEA), Fe 49.5 Mn 30 Co 10 Cr 10 C 0.5 (at.%). The as …

The microstructure design and the development of predictive approaches exploiting the
transformation-induced plasticity (TRIP) effect require a keen understanding of the kinetics …

The 3D‐printing of high‐entropy alloys (HEAs) is capable of enhancing the design and
manufacturing flexibilities for novel materials. Owing to the rapid solidification, the 3D …

In this contribution, for the first time, the effect of crystal orientation on the critical stress for
martensitic transformation in a medium Mn steel is explicitly revealed by using micropillar …

Metastable austenitic stainless steels are materials that can undergo austenite to martensite
phase transformation when subjected to deformation and thus they represent a multiphase …

We report evidence of a displacive phase transformation from retained austenite to
martensite during preparation of quenched and partitioned steel micro-pillars by using a …

The microstructural response of a coarse grained AISI 304 stainless steel submitted to
biaxial tensile loading was investigated using SEM and X-ray diffraction. The specimen …

The aim of the present study was to identify the effect of solute Ni element on the plastic
deformation and its thermal activation process of 18Cr ferritic stainless steels. Single-crystal …

The effect of pre-existing martensite on the sliding wear behavior of a commercial
metastable austenitic stainless steel was investigated. Two different steel conditions were …

Micro-compression tests were applied to evaluate the changes in the strength and
deformation mode of proton-irradiated commercial austenitic stainless steel. Proton …