Cu-Zr (copper-zirconium)
H Okamoto - Journal of phase equilibria and diffusion, 2012 - Springer
After [2006Wan], the Cu-Zr phase diagram was thermodynamically assessed by
[2008Tur],[2008Yam],[2010Kan],[2010Zho], and [2011Gie]. Among these, the phase …
[2008Tur],[2008Yam],[2010Kan],[2010Zho], and [2011Gie]. Among these, the phase …
Microstructure and properties of powder metallurgy Cu-1% Cr-0.65% Zr alloy prepared by hot pressing
J Zhou, D Zhu, L Tang, X Jiang, S Chen, X Peng, C Hu - Vacuum, 2016 - Elsevier
Abstract Powder metallurgy Cu–1Cr–0.65 Zr (wt%) alloy was fabricated using Cu, Cr, and
ZrH 2 powders as initial materials by hot pressing at 950° C for 4 h under 27.7 MPa …
ZrH 2 powders as initial materials by hot pressing at 950° C for 4 h under 27.7 MPa …
Generality of abnormal viscosity drop on cooling of CuZr alloy melts and its structural origin
It has been widely accepted that the viscosity of alloy melts increases monotonically with
temperature decreasing after exceeding the liquidus temperature. However, a distinct …
temperature decreasing after exceeding the liquidus temperature. However, a distinct …
Stable bonding of W and ODS steel fabricated by TLP diffusion technology through inserting a novel composite interlayer Zr/Cu
Bonding of tungsten (W) with oxide dispersion strengthened (ODS) steel is an urgent
challenge during the practical manufacturing process in many applications, including …
challenge during the practical manufacturing process in many applications, including …
Microstructure evolution of diffusion welded 304L/Zircaloy4 with copper interlayer
D Aboudi, S Lebaili, M Taouinet, J Zollinger - Materials & Design, 2017 - Elsevier
Diffusion-welding of 304L stainless steel with Zircaloy 4 was performed with a copper
interlayer. All the samples are composed of a reaction layer and a diffusion-affected zone in …
interlayer. All the samples are composed of a reaction layer and a diffusion-affected zone in …
[HTML][HTML] Better understand the crystallization dynamics of ZrCu TFMGs: Benefits of combining global and local in situ approaches
This work describes crystallization mechanisms in a model ZrCu thin film metallic glass,
synthesized through magnetron sputtering. Global-scale characterization techniques …
synthesized through magnetron sputtering. Global-scale characterization techniques …
High conductive copper alloys for additive manufacturing
T Fiedler, M Jähnig Domingues, C Winter… - Progress in Additive …, 2024 - Springer
For applications where high thermal and/or electrical conductivity combined with reasonably
high strength is required, copper alloys may be used. Although many different alloys were …
high strength is required, copper alloys may be used. Although many different alloys were …
'Thermodynamic assessment of the Ag-Zr and Cu-Zr binary systems
HM Hsiao, SM Liang, R Schmid-Fetzer, Y Yen - Calphad, 2016 - Elsevier
Abstract The Ag-Zr and Cu-Zr binary systems are thermodynamically reassessed in this
study. Not only phase diagrams, but also thermodynamic properties, such as enthalpy of …
study. Not only phase diagrams, but also thermodynamic properties, such as enthalpy of …
Phase equilibria of the Cu-Zr-Ti ternary system at 703° C and the thermodynamic assessment and metallic glass region prediction of the Cu-Zr-Ti ternary system
GN Hermana, HM Hsiao, PC Kuo, PK Liaw… - Journal of Non …, 2021 - Elsevier
Abstract The Cu-Zr-Ti alloys are one of popular metallic glass systems due to their high
glass-forming ability (GFA), lower cost, and good mechanical properties. The phase …
glass-forming ability (GFA), lower cost, and good mechanical properties. The phase …
Microstructure and mechanical properties of nano-carbon reinforced Mo–Cu–Zr composites
As an ideal reinforcing phase, nano-carbon has been widely used to improve the properties
of composites. In this paper, Mo–Cu–Zr ternary composites were reinforced with various …
of composites. In this paper, Mo–Cu–Zr ternary composites were reinforced with various …