Titanium (Ti) is an attractive material, abundant in nature and possessing superior
mechanical and chemical properties. However, its widespread use is significantly hampered …

Abstract Interfacial reactions between Ti-46Al (at.%) casting and ceramic shell mould made
of ZrO 2 and Al 2 O 3 were studied using a range of techniques. On the surface of the TiAl …

High-quality thin films of ZrN, Zr x Al y N and Zr x Ga y N have been grown by pulsed
reactive crossed-beam laser ablation using Zr, Zr-Al and Zr-Ga ablation targets, respectively …

The separation and control of undesired elements are key to recycling scrap or end-of-life
(EoL) metal products, as the quality of regenerated metals is often impaired by …

Thermite reduction as one of the most promising methods for preparation of TiAl alloy, the
metal-slag separation behavior in the whole process of chemical reaction, including both the …

To improve the coercivity of Dy free Nd 2 Fe 14 B magnet, it is necessary to prevent
oxidization of Nd-rich phase formed in grain boundaries on the basis of the information of …

Nickel-titanium (NiTi) alloy, a stoichiometric compound of nickel and titanium, has excellent
superelastic properties and shape memory effects with a recovery strain of 10%; it is …

分别采用Al 2 O 3 与Y 2 O 3 为壳型面层材料, 离心铸造了Ti46Al1B (原子分数,%) 合金阀门铸件,
通过SEM, XRD 以及气体分析等方法, 确定壳型内表面物相组成, 铸件与壳型反应层厚度以及 …

The mechanical properties of metals, such as strength, ductility, and toughness, are strongly
affected by interstitial atoms. In particular, titanium alloys are strongly affected by oxygen …

To realize radical cost reduction of titanium, a process is needed which can directly make
use of low quality material such as scrap, TiO 2 or titanium ore. In this work, a highly efficient …