The effect of shot peening (SP) on the fatigue life of S42200 steel at room and elevated
temperature is investigated. The fatigue test is carried out on a high temperature rotating …

In this work, dissimilar rotary inertia friction welds between 422 martensitic stainless steel
and 4140 martensitic low-alloy steel were made to fabricate prototype heavy-duty diesel …

The high-temperature properties of titanium carbide (TiC)–reinforced stainless steel (SS)
matrix composite, fabricated through infiltration process, were investigated across different …

The thermal load issue of pistons remains a topic of active research, especially the transient
thermal state of steel pistons in diesel engines under cold start conditions has not been …

In this study, the nitriding layer of the modified AISI422 martensitic stainless steel was
characterized by several method, including optical microscopy (OM), micro-hardness tester …

Five different commercially available high-temperature martensitic steels were evaluated for
use in a heavy-duty diesel engine piston application and compared to existing piston alloys …

Nano-structured coatings have been used to simulate adiabatic engines with the aim of not
only reducing heat rejection and thermal fatigue protection of the metallic surfaces but also …

In this work, the DC-bus voltage level control of an industrial induction hardening system is
studied for reduced load modeling including non-linearities on the electrical behavior. The …

Abstract The Compression Ignition of Directly Injected Natural Gas (CIDI NG) offers a
potential 25% reduction in CO2 emissions due to its high hydrogen-to-carbon ratio …

This paper describes the procedure of electromagnetic and thermal modeling of an
induction hardening load of 42CrMo4 steel. In addition to the temperature and field level …