This paper presents the obtained results of experimental tests and modelling of lightning
disturbances that were propagated in a model of aircraft cable bundle and caused by …

Introduction. Technical means of fire protection systems are capable of operating at data
rates from tens to hundreds of Kbit/s with components of a digital signal in the frequency …

The induced primary emission leads to changes in the primary emission of a device and the
induced secondary emission leads to changes in the propagation of supraharmonics in the …

Switching mode power supplies are widely used in electric vehicles (EVs), but
electromagnetic interference (EMI) can be caused in the power system by waveforms that …

Crosstalk is an easily occurred electromagnetic interference between adjacent cables.
Previous research on crosstalk mainly focused on straight cables, and seldom works are …

Introduction. Technical means of fire protection systems are capable of operating at data
rates from tens to hundreds of Kbit/s with components of a digital signal in the frequency …

Crosstalk is a significant concern in the design of cabling systems for UAVs (Unmanned
Aerial Vehicles). Some factors such as, cable length, type, spacing between cables, and …

Nonuniformity in transmission lines is known to be one of the causes of electromagnetic
compatibility (EMC) and signal integrity (SI) issues, especially at high frequencies. This may …

Crosstalk between cables due to near-field coupling can easily lead to performance decline
or even failure of the ship's communication system. In this paper, the modeling and …

The development of electric cars that use large electrical voltages, release harmonics that
cause interference in nearby systems. This study carried out simulations with the CST …