Current status of hard turning in manufacturing: Aspects of cooling strategy and sustainability
In recent years, hard turning has been found to be a well-known substitute for traditional
grinding for acquiring the finish quality of hardened steel without sacrificing productivity …
grinding for acquiring the finish quality of hardened steel without sacrificing productivity …
Investigation of progressive tool wear for determining of optimized machining parameters in turning
M Kuntoğlu, H Sağlam - Measurement, 2019 - Elsevier
On-line monitoring of tool wear and tool breakage are very important to reduce production
costs through the optimization of machining parameters. Increasing cutting forces affect …
costs through the optimization of machining parameters. Increasing cutting forces affect …
An overview on economic machining of hardened steels by hard turning and its process variables
Producers of machined components and manufactured goods are continually challenged to
reduce cost, improve quality, and minimize setup times in order to remain competitive …
reduce cost, improve quality, and minimize setup times in order to remain competitive …
Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication
S Mahapatra, A Das, PC Jena… - Proceedings of the …, 2023 - journals.sagepub.com
This article aims to analyze the tool vibration, surface roughness, and chip morphology in
hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed …
hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed …
Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420
The purpose of this experimental work is to study the impact of the machining parameters
(Vc, ap, and f) on the surface roughness criteria (Ra, Rz, and Rt) as well as on the cutting …
(Vc, ap, and f) on the surface roughness criteria (Ra, Rz, and Rt) as well as on the cutting …
Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN …
A comparative study is undertaken in terms of the surface roughness criterion (Ra), the
tangential cutting force (Fz), the cutting power (Pc), and the material removal rate (MRR) in …
tangential cutting force (Fz), the cutting power (Pc), and the material removal rate (MRR) in …
ANOVA and fuzzy rule based evaluation and estimation of flank wear, temperature and acoustic emission in turning
M Kuntoğlu, H Sağlam - CIRP Journal of Manufacturing Science and …, 2021 - Elsevier
Prediction of tool wear plays a key role in machining world due to its considerable impact on
total costs in terms of fabricated part quality and disposal of cutting insert before reaching the …
total costs in terms of fabricated part quality and disposal of cutting insert before reaching the …
Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI …
The present study aims at investigating the influence of the different machining parameters
represented by the cutting speed (V c), the depth of cut (ap), and the feed rate (f) on the …
represented by the cutting speed (V c), the depth of cut (ap), and the feed rate (f) on the …
Applicability of DLC and WC/C low friction coatings on Al2O3/TiCN mixed ceramic cutting tools for dry machining of hardened 52100 steel
The present work examines the applicability of DLC and WC/C low friction coatings on Al 2
O 3/TiCN based mixed ceramic cutting tools for the dry and hard turning of AISI 52100 steel …
O 3/TiCN based mixed ceramic cutting tools for the dry and hard turning of AISI 52100 steel …
Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods
The present work concerns an experimental study dealing with cutting parameters' effects on
the surface roughness, cutting force, cutting power, and productivity during turning of the …
the surface roughness, cutting force, cutting power, and productivity during turning of the …