Thanks to the low working temperature, less product size limitations and one order of
magnitude higher deposition rates compared to the established additive manufacturing …

Diamond-reinforced metal matrix composites (DMMC) prepared by cold spray are emerging
materials simultaneously featuring outstanding thermal conductivity and wear resistance. In …

Assessing the damage tolerance and durability of additive manufactured (AM) materials is a
key factor in the airworthiness certification of AM parts. Unfortunately, AM materials often …

A methodology that allows joint determination of fundamental engineering properties of
materials/components vital to their efficient design and a safe service lifetime operation is …

A fitting method capable of describing the fatigue crack growth rate (FCGR) data in all stages
of crack propagation by a simple Forman-style analytical formula was developed. To …

The study of fracture toughness of pure Al, Cu, Ni and Ti deposited by cold spray was
performed in order to obtain a fundamental understanding of the damage process and …

An alumina rich Al 2 O 3–ZrO 2–TiO 2 compound was used for the preparation of self-
supporting parts via the rod flame spraying technology. The as-sprayed material was …

Abstract Digital Image Correlation (DIC), with its advantages of full-field, non-contact and
applicability to extreme environments, is a powerful deformation measurement technique to …

Fracture toughness and fatigue crack growth rates of free-standing thick W deposits
produced in a protective atmosphere using radio frequency inductively-coupled plasma …

Fatigue behavior is strongly correlated with the residual stress state within thermal spray
coatings, with neutral or compressive residual stresses being favorable for fatigue-sensitive …