Spray and evaporation characteristics of n-pentanol–diesel blends in a constant volume chamber

Y Ma, S Huang, R Huang, Y Zhang, S Xu - Energy Conversion and …, 2016 - Elsevier
Due to its excellent physicochemical property and renewable characters, pentanol is
considered to be one of the most promising alternative biofuels applying to mobile vehicles …

The experimental study of flame height and lift-off height of propane diffusion flames diluted by carbon dioxide

C Tao, B Liu, Y Dou, Y Qian, Y Zhang, S Meng - Fuel, 2021 - Elsevier
The flame height and lift-off height of the turbulent jet diffusion flame of gas mixture at
ambient temperature and pressure were studied. Different diameter nozzles (2, 3 and 4 mm) …

Experimental investigation on spray, evaporation and combustion characteristics of ethanol-diesel, water-emulsified diesel and neat diesel fuels

Z Wang, S Wu, Y Huang, S Huang, S Shi, X Cheng… - Fuel, 2018 - Elsevier
This paper explored the spray and combustion characteristics of ethanol-diesel (E10), water-
emulsified diesel (W10) and neat diesel (D100), especially micro-explosion of E10 and W10 …

Combustion enhancement and soot reduction of kerosene-based fuel under engine-relevant conditions enabled by fuel reactivity modulation

Z Zhao, X Huang, M Xie, H Sheng, W Hu, J Chen, H Liu - Fuel, 2023 - Elsevier
Liquid fuels incorporating biomass components (eg, bio-alcohols) offer a great potential for
improving combustion performance and energy efficiency. However, the insufficient …

High-speed imaging of a vaporizing GDI spray: a comparison between Schlieren, Shadowgraph, DBI and Scattering

M Lazzaro - 2020 - sae.org
Isooctane sprays from a multi-hole GDI injector were inves-tigated in a constant volume
chamber by means of high speed imaging techniques. The tests were performed under inert …

Characterization of the liquid phase of vaporizing GDI sprays from Schlieren imaging

M Lazzaro - Measurement Science and Technology, 2019 - iopscience.iop.org
Isooctane sprays from a multi-hole GDI injector were characterized in a constant volume
vessel under different experimental conditions in an inert environment. A macroscale …

Thermodynamic analysis of indexes of operation of the engine with direct fuel injection for idle speed and acceleration

I Pielecha, W Cieślik - Journal of Thermal Analysis and Calorimetry, 2016 - Springer
Contemporary requirements for combustion engines are aimed mainly at obtaining
significant parameter values of their operation at simultaneously low fuel consumption and …

An image segmentation algorithm for fuel spray schlieren images with noisy backgrounds under engine-like conditions

Y Zhou, W Qi, Z Wei, Y Zhang - Experiments in Fluids, 2022 - Springer
Accurate digital image segmentation is necessary for analyzing the characteristics of fuel
spray from various optical measurements. However, some conventional segmentation …

On the Development of CFD Methodology for Free-Falling Varnish Stream Modeling to Support EV Motor Manufacturing

J Jan, B Petersen, X Huang, A Vijayan, J Li - SAE International Journal of …, 2023 - sae.org
When manufacturing the stators in EV motors, stator wires are first coated with a layer of
resin to provide primary insulation. After winding, impregnating varnish fills all voids within …

Unveiling the Flow Behavior Inside Gasoline Direct Injection Engine Cylinder Using High-Speed Time-Resolved Particle Image Velocimetry and Computational Fluid …

M El-Adawy, MR Heikal… - … of Engineering for …, 2021 - asmedigitalcollection.asme.org
Abstract ricardo-vectis computational fluid dynamics simulation of the in-cylinder air flow was
first validated with those of the experimental results from high-speed particle image …