High-Mn austenitic steel reinforced with carbide particles can significantly enhance the wear
resistance of steel. However, micron-sized particles may be detached from the surface of the …

Metal injection molding (MIM) is a near net-shape manufacturing process combining
conventional plastic injection molding and powder metallurgy. Two kinds of injections molds …

In this study, the processing parameters mechanical performance, corrosion and tribological
evaluation of a low carbon content Co–Cr–Mo alloy are discussed. The production of parts …

Introduction: The performance functionality efficacy of the engine's valve train assembly is
considerably affected by the valve guide. Material selection is impacted by the prolonged …

Steel matrix composites are being increasingly investigated because of their wear and
corrosion properties, allowing their wide application in various industrial sectors. The …

Additive manufacturing (AM) alternative technologies, including Fused Filament Fabrication
(FFF), offer the possibility to produce both prototypes and low-volume production metallic …

Soil preparation tools are subject to severe abrasion. The wear resistance of various
industrial components can be improved using the hardfacing technique. The improvement in …

Core-rim structures in TiC-based metal matrix composites are known to be an important
microstructural feature influencing the mechanical properties of the material. While this is a …

The S136 mould steel matrix with varying mass fractions of TiB 2 (0–2.5 wt%) were
produced by selective laser melting (SLM). This study mainly focused on the influence of TiB …

Abstract Tapping within small holes (0.112 in.) of Ti6Al4V alloy is considered as a
challenging issue, mainly manifest in excessive tap wear, low tap life and poor thread …