First a few words about the genesis of this review, which is alreadythe third on this subject in
this series (Al, A2). I tried to preserve as much as possible of the scope and the format of the …

In this review solid-state sensors for on-line monitoring of such water quality parameters as
pH, dissolved oxygen (DO), conductivity, turbidity, dissolved organic carbon (DOC) and …

Glass pH electrodes are being utilized for the measurement of pH values using liquid
internal reference systems, which had been introduced on principle nearly hundred years …

Plastic, fully screen-printed, disposable pH sensors based on ruthenium dioxide are
described. Application of thick-film technology results in highly reproducible fabrication of …

Two modified electrodes were fabricated by deposition of thin films of α-PbO2 and β-PbO2
on aluminum substrate electrodes. Both electrodes exhibit potentiometric response to the …

Traditional pH glass electrodes are designed in a symmetrical manner to guarantee the
most reliable and reproducible potentiometric measurements possible. Solid-contact and …

The MnO2–montmorillonite composite mass has been investigated as an all-solid internal
reference for pH sensors. Owing to its protonic conducting and cationic exchange features …

In this work, a new NiCo 2 S 4 based H+ ion-selective electrode (ISE) without a polymer
membrane was proposed and used to rapidly monitor the pH values of wetland soils in the …

In this paper, the function and electric properties of the ternary hybrid system
glass/polypyrrole/Pt as solid inner contact for an all-solid-state pH glass electrode were …

In the composition of commercial RuO2-containing resistive pastes there is also a significant
amount of other electro-active metal oxides. Thus, when the pastes are used in the …